Fujitsu SRS-9924 manual Multifunction, Buttons

1

NI /

5E Custom Terminal Overview

MULTIFUNCTION	Multifunction buttons have three uses:
BUTTONS	One-touch: Dial a stored number.
	Network Feature: Activate or deactivate a special
	network feature, such as call forwarding.
	Call Appearance (CA) or Directory Number (DN):
	Handles incoming or outgoing calls.
	Use and set-up of the multi-function buttons is
	covered in Chapters 2 and 3 respectively.
	Special features such as call forwarding are provided
	by the ISDN network. These features are selected
	by your System Administrator and assigned to
	buttons on your phone during installation.
	Appendix C describes frequently used
	assignments and ordering codes for NI.
Multiple Directory	Each digital set associates its primary DN with
Number	multifunction button 1. Multiple appearances of
Appearances	the same DN are always on adjacent CA buttons.
	(The button at the end of a row is “adjacent to” the
	button beginning the next row up.)
	Note: This guide uses the term directory number
	appearances to refer to telephone numbers
	that appear on more than one CA button.
	The Nortel term for CAs that can handle more
	than one call is Additional Functional Calls.
	A telephone can also be assigned additional
	DNs. Each such number can then be assigned
	to adjacent buttons as well to allow multiple
	call handling on that line.
	Any DN assigned to one phone can also appear
	on another phone, which can then share the use
	of that line.
Call Handling	Figure 1-8 shows a digital set whose primary DN is
Example with	747-3456, with two additional CA buttons assigned
Multifunction	that same number. The telephone’s secondary line
Buttons	is 747-7890, which has two appearances.

1-8