Fujitsu SRS-9924 manual Function

2

Using the

Terminal

Method 2	Enter all numbers before you pick up the handset or
	press the SPKR button.
	1. Press the access code delimiter button. A colon		5E
	appears on the screen after the number.
	2. Dial the leased network access code. The access		CUSTOM
	code appears on the screen after the colon.
	3. Press the delimiter key again. Another colon
	appears on the screen after the access code.
	4. Dial the number of the person you want to call.		ONLY
	The number appears on the screen after the
	second colon.
	5. To start the call, pick up the handset or press the
	SPKR button. Your digital set automatically sends
	the entered numbers and code to connect to
	the leased network number.
FUNCTION	The terminal has six function buttons, located to
BUTTONS	the left of the numeric keypad.
	Three buttons are permanently assigned to local
	functions (REDIAL, HOLD, and SPKR) and the other
	three buttons are usually assigned to CONFerence,
	DROP and TRANsfer.
	On NI, Fujitsu supports two sets of telephone
	company assignments for network based features.
	On the labeled function buttons for CONF, DROP,
	and TRAN, Fujitsu sets accept the following values
	or feature activators:
	CONFERENCE	Button 18
		Activator 18 or 60
	DROP	Button 19	NI
		Activator 19 or 62
	TRANSFER	Button 20	ONLY
		Activator 20 or 61
	Note: The SRS-9924 and SRS-9912-SP use the
	same button numbers and Feature
	Activators for the user assigned function
	keys.

2-6