Setting Description Value Range Default
Factory Setting Reset all settings to their
factory-shipment state.
— —
IP Reset Reset the following settings to their
default values:
•FWD/DND Setting (Page 40)
•Language (Page 41)
•Date and Time (Page 42)
•Network Settings (Page 42)
— —
Restart
Setting Description Value Range Default
Restart Restart the unit (Page 70). — —
Firmware version
Setting Description Value Range Default
Firmware version View the version of the currently
installed firmware. If a newer version
is available, its version is also
displayed. In this case, press
to update the firmware.
— —
Note
•Your phone system dealer may offer new features or an improved version of the unit's software from
time to time. If you set the base unit software update setting to manual mode through the Web user
interface, you need to download the update when "Update version. Press OK." is displayed.
Contact your administrator or dealer for further information.
Document Version 2011-06 Operating Instructions 45
Customizing the Telephone