Customizing the Telephone
Setting
Network
DNS (DHCP only)
IP address*1 (STATIC only)
Subnet mask*1 (STATIC only)
Default Gateway*1 (STATIC only)
DNS1*1 (STATIC or
Manual DNS)
DNS2*1 (STATIC or
Manual DNS)
VLAN
Enable VLAN
IP Phone
VLAN ID
Priority
PC
Description
Configure the basic network settings. If you select DHCP, you must then select whether the DNS setting is configured automatically or manually. If you select STATIC, you must manually specify the IP address, subnet mask, default gateway, and DNS servers.
Select whether the DNS server information should be obtained automatically (i.e., provided by the DHCP server) or if you will specify it manually.
If you select Manual, see "DNS1" and "DNS2" below.
Enter the IP address to assign to the unit.
Enter the subnet mask for your network.
Enter the IP address of the default gateway for your network.
Enter the IP address of the primary DNS server.
Enter the IP address of the secondary DNS server.
If a secondary DNS server is not required, leave this item blank.
Configure the VLAN (Virtual LAN) settings.
Select whether to enable the VLAN functionality.
Specify the necessary settings for using the phone features over a VLAN.
Specify the VLAN ID.
Specify the priority of packets sent from this unit.
Specify the necessary settings for using a PC over a VLAN.
Value Range
DHCP, STATIC
Manual, Automatic
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
—
Yes, No
—
—
Default
—
Automatic
—
—
—
—
—
—
No
—
2
7
—
Document Version | Operating Instructions |
43