Date and Time
Setting Description Value Range Default
Date and Time Set the date and time. Date*1: dd/mm/yy or
mm/dd/yy
Time*2: 00:00–23:59
or 12:00–11:59 AM/
PM
—
*1 Pressing [#] switches the date format.
*2 If the time format is not assigned in the configuration data, you can change the time format (12-hour or 24-hour) by pressing [*].
If the time format is set to 12-hour time in the configuration data, you can change the AM/PM setting by pressing [*].
Note
•Daylight-saving time can be set through Web user interface programming. For details, consult your
administrator or dealer.
Information Display
Setting Description Value Range Default
Information Display View a variety of information about
the unit. Press [ ] and [ ] to display
the various settings. The following
settings can be viewed:
•Registration status to the SIP
server
•IP address
•Subnet mask address
•Default gateway address
•IP address of the DNS server 1
•IP address of the DNS server 2
•ACS status
•Display lock status
•Firmware version
•MAC address
— —
Network Settings

IMPORTANT

We recommend configuring these settings with your administrator or dealer. Network settings can also be
configured through Web user interface programming (Page 55). Contact your administrator or dealer for
further information.
42 Operating Instructions Document Version 2011-06
Customizing the Telephone