HOMELOGIC CONFIGURATION DETAILS
The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.
In the table below: |
|
|
|
|
o “<User Defined>”, etc. | Type in the desired name for the item. |
| ||
ONEHOME SOFTWARE VERSION 3.0 |
|
|
| |
|
|
|
|
|
Devices | Variable Name |
| Setting | Comments |
|
|
|
|
|
Communication Device | N/A (See Note 1) |
| N/A (See Note 1) |
|
|
|
|
|
|
|
|
|
|
|
Video Cameras | Name |
| <User Defined> (Default: Panasonic KX/BL/BB Series) |
|
| Device Type |
| Panasonic KX/BL/BB Series |
|
| Location |
| <User Defined> (Not Required) |
|
| IP Address |
| <User Defined> (Default: 192.168.0.80) (See Note 2) |
|
Notes:
1.No Communication Device is needed: just add Video Cameras.
2.By default, set the first camera to 192.168.0.80, the second to 192.168.0.81, and so on.
ONEHOME SOFTWARE VERSION 4.0
Devices | Variable Name | Setting | Comments |
|
|
|
|
Communication Device | N/A (See Note 1) | N/A (See Note 1) |
|
|
|
|
|
|
|
|
|
Video Cameras | Name | <User Defined> (Default: Panasonic |
|
| Device Type | Panasonic |
|
| Location | <User Defined> (Not Required) |
|
| IP Address | <User Defined> (Default: 192.168.0.80) (See Note 2) |
|
Notes:
1.No Communication Device is needed: just add Video Cameras.
2.By default, set the first camera to 192.168.0.80, the second to 192.168.0.81, and so on.
9 of 9