Panasonic VQT0U23 When Pictures cannot be Acquired, Check the following items first

Page 26

Others

When Pictures cannot be Acquired

•When pictures cannot be acquired though you connect your digital camera and PC using the USB connection cable, use the following procedures.

∫Check the following items first.

Is [USB MODE] in the [SETUP] menu set to [PC] on the digital camera side?

When Windows 98/98SE is used, install the USB driver (P6), then connect the cable.

If the PC in use has two or more USB ports, connect the USB connection cable to other USB ports in turn.

•If you connect the digital camera to a USB port of the PC’s keyboard, normal operation may not result.

•If you connect the digital camera using a USB hub or USB extension cable, normal operation is not guaranteed.

Is any Card inserted into your digital camera? Or, are there pictures on it?

Are the pictures already acquired to the PC?

•You are not allowed to acquire the same pictures.

∫Pictures cannot be acquired

even after the above checks.

Make sure that [Removable Disk] is added in [My Computer].

• Drive letters (e.g., H:) may vary depending on PC.

If the Removable disk is not added, perform the following operations.

1Click [Start] >> ([Setup] >>) [Control Panel], and double-click [System].

2Click ([Hardware] >>) [Device

Manager], and check that [Other Devices] is displayed.

3If [Other Devices] is displayed, delete it.

•If it is not displayed, check the connection. (P8)

4Return to the original screen, and turn off the PC.

5Disconnect the USB connection cable

from the PC.

6Turn on the PC to start it.

7Install the USB driver again. (For

Windows 98/98SE only)

8Connect the USB connection cable to the PC.

•Check that a [Removable Disk] is added again. If any [Removable Disk] is not added, repeat the above steps.

26

VQT0U23

Image 26

Contents Operating Instructions Connection with the PC Offers much more Enjoyment Contents Read Before Use Key termsIs Simple Viewer compatible with any PC? MacintoshInsert the CD-ROM Installing the SoftwareIf the setup menu does not start automatically Installing Simple Viewer If Simple Viewer cannot be installedConnecting the Digital Camera to PC Preparations on the digital camera sideAcquire destination folder When you click Cancel during acquisitionAcquiring pictures to the PC Acquire to PC Select View Select any location where pictures are savedViewing pictures View Picture View Folder displayThumbnail display DegsFull screen display Printing pictures Print Select PrintPlease select the printing type One sheet Set up printing, and click NextClick Add and then click Next Two sheets, Four sheets, Eight sheetsCheck the layout, and set up printing Click Start printingSending pictures by e-mail Send by e-mail Select Send by e-mailClick Send by e-mail E-mail programme does not start automaticallySelect any function to be used AdvanceSelect Advance Click Start Click OK, and then click Completion to complete the additionClick Write Writing to the card is carried outAutomatic acquisition Select Setting Set the settings and click OKDefault Updating for the folder listTo disconnect the USB connection cable safely After Using Simple ViewerTo exit Simple Viewer Click Exit Task tray of the PC screen To disconnect the USB connection cable safely To Acquire Picture without Using Simple Viewer What is a drag-and-drop operation? How to Use on Macintosh To make sure that the digital camera is connected correctlyHow to Remove the USB Driver and Simple Viewer Uninstall Pictures cannot be acquired Even after the above checks When Pictures cannot be AcquiredCheck the following items first About Simple Viewer Question Answer TroubleshootingAbout connection/acquisition Question Answer About printing Question Answer Icon of Lumix Simple Viewer on the desktop Lumix Simple Viewer Operating EnvironmentUSB-connectable environment Others VQT0U23