Panasonic Instructions for Dubbing from SD Card to DVD Recorder

LSQT1214_GN.book 71 ページ ２００７年２月８日 木曜日 午後８時５０分

With other products

[TV ASPECT] setting

[16:9] [4:3]

≥This function’s default setting is [16:9].

∫To display the on-screen information on the TV (SDR-H250)

The information displayed on the screen (operation icon and time code, etc.) can be displayed on the TV.

Press the EXT DISPLAY button on the remote control.

START/

EXT PHOTO STOP

DISPLAY SHOT

DATE/

TIME ZOOM

VOL

≥Press the button again to erase the information.

≥The screen on this unit will not change.

With a DVD recorder

Dubbing recordings onto a DVD recorder

[SD]

If you have a DVD recorder with an SD card slot, images recorded by this unit can be dubbed onto the hard disk or a DVD disc.

Refer to the operating instructions of your DVD recorder for information about whether or not it supports dubbing from an SD card.

≥If your DVD recorder does not support dubbing from an SD card or you want to dub images on the HDD of this unit, connect this unit and the

DVD recorder with the AV/S cable (supplied) and then dub. (l below)

Insert the SD card into the SD card slot on the DVD recorder, then dub the contents onto the hard disk or a disc.

≥For details on how to dub the images, refer to the operating instructions of the DVD recorder.

If you dub images directly from the SD card or with the AV/S cable and then play them back on a wide-screen TV, they may be squeezed horizontally. In this case, refer to the operating instructions of the device you are dubbing to or read the operating instructions of the wide- screen TV and set the aspect setting to 16:9 (Full).

With a VCR

Dubbing images onto other video devices

[HDD] [SD]

You can dub images played back on this unit onto other video devices.

You can create a playlist by gathering the scenes on the HDD that you want to dub, then dub the scenes in this playlist only to other devices.

(l 61)

≥Use the AC adaptor to free you from worrying about the battery running down.

71

LSQT1214