Panasonic PV-SD5000 operating instructions Press REC Mode

Capturingapt ring Imagesmages

Motion Image Rec Mode,

Burst Rec Mode

You can select		Motion Image capture
or	Burst Image capture as the REC
MODE.

Before you begin

Remove the Lens Cap. Set the POWER to REC or MANUAL REC.

(See pages 18, 19.)

POWER Switch

1	Press REC MODE		repeatedly to select
	Motion (	) or Burst (		) recording
2	mode.
	Press ZOOM T or W			to zoom In and
	Out.
3	• Zoom magnification level is up to 3X.
	Press SHTR	down halfway to lock
	Auto Focus.
	• Beep sounds twice. (See page 26.)
4 Hold down the SHTR				button the rest of

LCD Viewfinder

2 ZOOM Switch

1 REC MODE Button

the way to actually capture the image.

If you select AUDIO ON, audio will be

recorded through the MIC. (See page 22.)

REC MODE

•A Motion Image with audio can be captured for up to 12 seconds.

REC MODE

•A burst of up to 5 images with no audio (one frame every 0.9 seconds) can be captured while SHTR is pressed.

•While the Digital Camera processes

3, 4 SHTR	MIC
(SHUTTER)

24

the image, REC will flash on the LCD Viewfinder and the captured image will be displayed on the LCD Viewfinder for a few seconds.

Note
• If you select	, you can not record
audio.

•The next image cannot be captured until the previously captured image is no longer displayed on the LCD Viewfinder.

•Power shuts off if there is no activity over

1 minute with Battery as a power source to conserve power. Press SHTR to turn power back on.

For assistance, please call : 1-800-272-7033.

SD5000. p21-24.p65 24 80/01/04, 11:39