Remote Access (Macintosh)
Time Lapse Recording
You can set the recording interval, image mode and clock for time lapse recording.
1 Select [Time Lapse...] from the Remote Access dialog box.
2 The time lapse dialog box will be displayed.
3 Set Record, Interval, Mode and Clock Setup.
Record :
Select [ON] for time lapse recording.
If you are not going to use or wish to exit time lapse recording, select [OFF].
Interval :
To set the recording time interval. A length of 1 minute, 5 minutes, 10 minutes,
30 minutes, 1 hour, 6 hours, 12 hours and
24 hours can be set.
Mode :
Select the recording mode (see page 21).
Clock Setup :
To set the internal clock of the Camera. Move the cursor and type the date and time. Click [Clock PC] to set the Camera's clock to the PC's clock setting.
Remaining :
Displays the number of images which can be saved on the CF card.
4 After setting is completed, click [OK] to exit the Time Lapse dialog box.
•Changes made regarding the time lapse function take effect by clicking the [OK] button in the Time Lapse dialog box.
If you select [Cancel], all settings are cancelled.
When you wish to stop time lapse in progress, repeat step 1 and set Record to [OFF], then click [OK].
Special Features
71