Inserting the SuperDiskTM Diskette or Floppy Disk
Inserting the Disk Media:
•The captured images will be stored on the Disk Media.
•Be sure to insert the Disk Media before using the camera.
EJECT button
2
1
Emergency Eject hole
1 Open the cover. Insert the Disk Media.
2 Push the Disk Media fully into the SuperDisk Drive.
Removing the Disk Media:
Set the POWER Switch to REC, PLAY or PC. Push the EJECT button so the Disk Media pops out. (Be careful not to drop the Disk Media.)
Emergency Ejection of the Disk Media:
If, for some reason, the Disk Media does not eject automatically, you can eject manually. (Turn POWER OFF before proceeding.) Insert a straightened paper clip, etc., (diameter = 1~1.5 mm, min. length = 30 mm) into the Emergency Eject hole.
Min. 30 mm
Paper Clip
Ge tti ng
Sta rte d
Using a Floppy Disk
A Floppy Disk (not supplied) which has been formatted to Windows on your Floppy Disk Drive can be used in the SuperDisk Drive. (See pages 61, 64.)
When using a new Floppy Disk, it is recommended that the Disk be inserted into the Digital Camera and formatted (Quick Format).
If a read error occurs in the PC Floppy Disk Drive, use the Digital Camera to read the data.
SuperDisk Diskette | 120MB Format |
|
|
Floppy Disk (2HD) | 1.44MB Format |
|
|
*SuperDisk Diskette *Floppy Disk (2HD)
*The SuperDisk Diskette is only supported by Windows 98 or Mac OS 8.1 or later. For other operating systems, you should use Floppy Disk.
Note
•Only DOS formatted floppy disks can be used with this Camera. Macintosh OS formatted floppy disks must be
•You can use this unit as a SuperDisk Drive. (See pages 48, 56.)
•The SuperDisk Diskette is only used for SuperDisk Drive.
•To format the Disk Media, see pages 62, 64.
17
17 | 99/11/11, 16:38 |