Panasonic PV-SD4090 Motion Image Rec Mode Burst Rec Mode, Hold down the Shtr button the rest

Motion Image Rec Mode Burst Rec Mode

You can capture a motion image by selecting in REC MODE. And you can

capture a burst image by selecting in

REC MODE.

Before you begin

Open the Lens Cover. Set the POWER to REC or MANUAL REC. (See pages 19~20.)

3, 4 MIC

2	REC	OFF
		PLAY

MANUAL	PC
REC

LCD Viewfinder

VOL+

- +

VOL-1

Capturing Images

1 Press REC MODE repeatedly to select

Motion () or Burst ( ) recording mode.

2 Press ZOOM T or W to zoom In and Out.

•Zoom magnification level is up to x3.

•There is no zoom indication on the LCD Viewfinder.

3 Press SHTR down halfway to lock			Basic
Auto Focus.
• Beep sounds twice. (See page 27.)			Operation
4 Hold down the SHTR button the rest of
the way to actually capture the image.
If you select AUDIO ON, audio will be
recorded through the MIC.
		REC
REC MODE	10	SEP. 10 2000
		10 : 00 AM

• A Motion Image can be captured up to 10 seconds while SHTR is pressed with audio.

REC MODE

• A Burst Image can be captured every 0.5 seconds/frame up to 16 frames while SHTR pressed.

•While the Digital Camera processes the image, REC will blink on the LCD Viewfinder and the captured image will be displayed on the LCD Viewfinder for a few seconds.

•Cannot record audio.

Note

• If you select , you can not record audio.

•When a captured image is displayed on the LCD Viewfinder, you will not be able to capture another image until that image is no longer displayed on the screen.

•The power automatically shuts off to conserve power if there is no activity for over one minute while the battery is used as a power source. Press SHTR to return POWER on.

25

SD4090.p22-33.p65 25 99/11/11, 16:39