Panasonic SV-AV10U operating instructions Power Supply, Using AC Adaptor, Using the Battery

Page 6

DC IN 4.8V

1

2

Using the Battery

1

2

DC IN 4.8V 1

3

4

Removing the Battery

Power Supply

ªUsing AC Adaptor

1Connect the AC Main Lead to the AC Adaptor and the AC main socket.

2Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device.

THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

ªUsing the Battery

1While holding the [ ] part, slide it to remove the Battery Compartment Cover.

2Press the terminals of the battery onto the terminals of the Battery Compartment and set the battery.

Fit the battery with its label facing upward. After the battery is set, close the cover.

3Connect the AC Main Lead to the AC Adaptor and the AC Main socket.

4Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device.

Power Lamp flashes, and Charging starts.

5Wait until Power Lamp 1 goes off.

When recharging is completed, Power Lamp goes off.

Disconnect the DC Input Lead and hold down the [ ] button for two seconds or more, and the SD Multi AV Device is turned ON.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

When the Battery Level Indicator indicates [ ], the battery will run out in a few minutes. Recharge the battery.

It takes about 120 minutes, maximum for full-charging. (The charging

times are for normal ambient temperature (68F°(20° C) /60%). If the Battery is charged at a higher or lower temperature, the charging time may be longer)

When recharging, turn the power of the SD Multi AV Device OFF.

If the Power Lamp flashes quickly (or slowly) when recharging, recharging is not normal. (l 35)

When the battery is running out while the SD Multi AV Device is being used, the Power Lamp starts to flash. Recharge the battery or use the SD Multi AV Device with the DC Input Lead connected.

If you disconnect the DC Input Lead or the AC Main Lead while charging the Battery, Power Lamp flashes several times and goes off. For continuing Battery charge, wait for about 1 minute, and then connect the AC Main Lead and the DC Input Lead.

6

Image 6
Contents SD Multi AV Device Contents Dear Customer Information for Your SafetyFCC Note U.S. only Carefully observe copyright lawsPower supply frequency Standard AccessoriesOptional Accessory IntroductionControls and Components Attaching the Neck StrapPower Supply Using AC AdaptorUsing the Battery Removing the Card Using the LCD MonitorInserting a Card Inserting a Card Removing the CardSelecting Operation Modes Turning the Power onTurning the Power OFF About the Operation ModesREC Mode Using the Menu ScreenªREC Mode List of MenusPlayback Mode Sub-Menu for REC ModeSub-Menu for Playback Mode Sub-Menu for PlaybackSetting the power supply frequency To Release this modeTo Adjust Adjusting Brightness and Color LevelSetting Date and Time Press the Menu Button twiceTo stop recording Display in the moving picture MPEG4 modeRecording Moving Pictures MPEG4 Press the Recording Start/Stop ButtonTo stop playback Set the Operation Mode to PLAYMPEG4Playing Moving Pictures MPEG4 To find the beginning of a moving picture fileDisplay in the Still picture mode Recording Still PicturesTo play the next /previous file Set the Operation Mode to PlaypicturePlaying back Still Pictures While playing back, press down the center of the Jog LeverDisplay in the Voice Mode Recording Voice Voice Recording FunctionHearing the Voice Recorded Playback Sound Fast forward fast backward playbackTo find the beginning of a voice file ≥Music cannot be heard without connecting the earphones Listening to Music Music PlayTo find the beginning of a music file Using the Earphones Adjusting the VolumeAdjusting White Balance Backlight Compensation FunctionTo Resume Normal Recording Set Erase ALL Files on the Card Editing 4 Menu to YES Erasing the Files Recorded on a CardTo erase All Files Select YES Press the Menu Button twiceTo lock all files Protecting files File ProtectionTo release the File Protection Select File Protection in StepWriting Printing Data on a Card Dpof Setting To release all the Dpof settingsTo cancel the Slide Show Playing back still pictures one by one Slide ShowFormatting the Card SD-MovieStage Operating environmentInstalling SD-MovieStage Connecting an SD Memory Card Starting SD-MovieStageClick the YES Button Others After UseUsing a Card in a Personal Computer Constructing a Folder when the Card is used with a PCIndications 100-0001Displayed by the text LOW Battery Card FullAbout the AC Adaptor Optimal Use of the BatteryAbout the Lens About the LCD MonitorBattery Protect SwitchState of Power Lamp while charging SD Multi AV DeviceBefore Requesting Service Specifications SD Multi AV Device Panasonic SV-AV10ULimited Warranty For U.S.A. Only Limited WarrantyProduct or Part Name Parts Labor Customer Services Directory For U.S.A. Only Centralized Factory ServicenterEncender Alimentación eléctricaInserción de la Tarjeta Utilización del adaptador ACPusar el botón Mode para seleccionar Play Pulsar el botón ModePusar el botón Mode para seleccionar REC Presionar el centro de la palanca de avancePage Page Panasonic Canada Inc

SV-AV10U specifications

The Panasonic SV-AV10U is a compact digital audio-video recorder that combines innovation and convenience for users seeking a versatile device for capturing high-quality content. Designed primarily for portability and ease of use, the SV-AV10U integrates various advanced technologies that cater to both amateur and professional videographers alike.

One of the standout features of the SV-AV10U is its ability to record video in a resolution of 640x480 pixels, which was considered quite notable for its time. This feature, along with a 30 frames per second recording capability, ensures smooth playback and clear images. Furthermore, it supports a variety of recording formats, including MPEG-4, which allows for efficient storage and easy sharing of content.

The device is powered by a built-in lithium-ion battery, providing extended recording times that are essential for capturing longer events or activities. The inclusion of a 1.5-inch color LCD screen enhances user experience by allowing for easy navigation of menus and immediate playback of recorded videos without needing an external device.

In terms of audio, the SV-AV10U features a built-in stereo microphone which captures clear audio, complementing the video recording capabilities. Additionally, it supports voice recording, making it a versatile option for those who also enjoy creating audio content.

Connectivity is another key aspect of the SV-AV10U. It comes equipped with a USB port, which facilitates easy transfer of files to computers or other devices, enhancing the overall user experience. The inclusion of a 1.5-inch speaker also allows for immediate audio playback, making it convenient for users to review their recordings on the go.

Durable construction is also a hallmark of the SV-AV10U, designed to withstand the rigors of travel and outdoor use. Its lightweight yet robust design makes it an excellent choice for users who are often on the move and require a reliable device.

Overall, the Panasonic SV-AV10U is a well-rounded digital video recorder that integrates essential features and technologies, making it ideal for casual users and content creators who need a portable solution for video and audio recording. Its blend of quality, durability, and user-friendly design ensures it remains a useful tool for capturing life's moments.