for
≥Do not use the personal computer (Explorer) to format it. Otherwise, it may not be recognized by the SD Video Camera.
≥If the write protection switch of the SD
Memory Card is set to [LOCK], data cannot be erased.
≥When the Memory Card is formatted, the files will be deleted, even if files are locked.
≥As formatting erases all the data, save the necessary data on a personal computer, etc. beforehand.
≥Formatting may take a little time. Wait until the Card Access Lamp goes out.
≥While formatting a card, you should not remove the Memory Card or turn off the power. The card may be damaged.
ªInstalling SD-MovieStage Ver.2.5
(l 38)
≥If you failed to install DirectX 9.0b when installing
ªConnecting to the PC (l 40)
≥To erase pictures that you recorded on the Memory Card by using the SD Video Camera, be sure to erase them on the SD Video Camera or
≥You may not be able to properly play back on the SD Video Camera after editing the recorded data or changing the image data on a personal computer.
≥Moving Picture format (MPEG4) that can be played back on the SD Video Camera is ASF. (Depending on the file, it may not be able to be played back even if it is in ASF format.)
≥When you operate the SD Video Camera using its buttons, pull out the USB cable. (The SD Video Camera cannot be operated in the [PC accessing] mode.)
≥When you play back MPEG4 moving picture file in the card on a personal computer while the SD Video Camera and the personal computer are connected, the frame of the picture may be dropped. In this case, copy the desired file to the personal computer and play it back.
≥Use only the supplied USB cable.
≥Do not remove the AC adaptor when the SD Video Camera is connected to the personal computer.
≥If the SD Video Camera’s personal computer peripheral mode
([PC accessing] is displayed) is not canceled when the personal computer is turned off, remove the USB cable.
≥If the personal computer switches to the suspend mode when the SD Video Camera is connected to it, the personal computer may not recognize the SD Video Camera when it reverts to normal mode. In this case, restart the personal
computer.
≥When you restart the personal computer while it is connected to the SD Video Camera, the personal computer may be stopped during the restart. In this case, turn the personal computer off, disconnect the USB cable connecting the SD Video Camera and the personal computer or turn the SD Video Camera off, and then restart the personal computer.
55