Panasonic PV-DC3000 Motion Image Rec Mode Burst Rec Mode, Press Shutter, Hold down the Shutter

Motion Image Rec Mode,

Burst Rec Mode

You can select		Motion Image capture
or	Burst Image capture as the REC
MODE.

Before you begin

Set the POWER Switch to			(REC)
or	(MANUAL REC).
(See pages 15, 16.)
LCD	Viewfinder	2 ZOOM TELE/
			WIDE Button

POWER Switch 1MODE Button

3, 4

SHUTTER

Capturing		Images
Capt ring		Images
1	Press MODE repeatedly			to select
	Motion (	) or Burst (		) recording
2	mode.
	Press ZOOM TELE or WIDE			to zoom
	In and Out.
3	• Zoom magnification level is up to 2X.
	Press SHUTTER		down	halfway to lock
	Auto Focus.

•“ ” mark is displayed on the screen.

•Beep sounds twice. (See page 23.)

4 Hold down the SHUTTER	button the
rest of the way to actually capture the
image.

REC MODE

•A Motion Image with audio can be captured for 12 seconds when SHUTTER is pressed.

REC MODE

•A burst of up to 3 images with no audio (one frame every 1 second) can be captured while SHUTTER is pressed.

•While the Digital Camera processes the image, REC will flash on the LCD Viewfinder and the captured image will be displayed on the LCD Viewfinder for a few seconds.

Note

• If you select , you cannot record audio.

•The next image cannot be captured until the previously captured image is no longer displayed on the LCD Viewfinder.

•Power shuts off if there is no activity over 1 minute with Battery as a power source to conserve power. Press SHUTTER to turn power back on.

21

BasicBasic OperationOperation

3000.p18-21.p65 21 00/09/25, 10:39