Panasonic KX-TGA573S operating instructions Wall mounting, Connecting the wall-mounting adaptor

Page 17

Useful Information

Wall mounting

The cordless camera can be mounted by the standard mounting or upside down mounting.

CAUTION:

LMount the cordless camera on the stable location where the unit can be adequately supported when installing.

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LDo not mount the cordless camera on a soft material. It may fall down, break or cause injury.

LDo not mount the cordless camera on the following places: plaster board, ALC (autoclaved lightweight cellular concrete), concrete block, plywood less than 25 mm (1 inch) thick, and etc.

LDo not pull the call button wire after you mount the cordless camera on the wall.

LAfter mounting the cordless camera on the wall, speak loudly and clearly into the MIC when talking with the handset user.

Connecting the wall-mounting adaptor

ASlide the cordless camera into the wall-mounting adaptor in the direction of the arrow until it clicks into the place.

BTuck the call button wire into the hole on the side of the wall-mounting adaptor by plugging the small wire fixture into the hole.

CTurning it slightly and sliding it in place.

DFasten the call button wire to the hook of the wall-mounting adaptor.

For assistance, please visit http://www.panasonic.com/phonehelp

17

Image 17

Contents Operating Instructions Introduction Introduction Feature highlightCamera monitoring using the color display handset Included accessories Accessory informationAccessory item Order number Quantity Sales and support informationMedical Important safety instructionsInstallation For best performance Conditions for using the cordless cameraAvoiding noise EnvironmentStatus Description Understanding the cordless camera indicatorControls Connecting the AC adaptor and the call button Setting up the cordless cameraAdjusting the cordless camera lens angle DIP switch Function On default Setting the DIP switchesDisplaying the image upside down DIP switch Selecting the cordless camera speaker volume DIP switchExample Symbols used in these operating instructionsSymbol Meaning Deregistering the cordless camera Registering the cordless cameraBase unit Cordless cameraTalking to the paged party using the cordless camera Adjusting receiver/speaker volumeMonitoring the cordless camera from a handset Handset Paging the handsets from the cordless camera Paging using the cordless camera audio sensorSelecting image zoom Useful settings while camera monitoringAdjusting the display brightness Save Setting the audio detection sensitivityWall mounting Connecting the wall-mounting adaptorUpside down mounting Mounting the cordless camera on the wallStandard mounting Wall mount template for the cordless camera Removing the wall-mounting adaptorAbout the screws for wall mounting Problem Cause & solution TroubleshootingUseful Information FCC RF Exposure Warning FCC and other informationSpecifications Customer Services Directory Customer servicesSan Gabriel Industrial Park WarrantyAve de Infantería, Km One Panasonic Way Secaucus, New JerseyLimited Warranty Limits And Exclusions Index Copyright When you ship the productPanasonic Puerto Rico, Inc