Panasonic KX-TGA573 Registering the cordless camera, Deregistering the cordless camera, Base unit

Page 12

Preparation

Registering the cordless camera

Register the cordless camera to a KX- TG5761/KX-TG5766/KX-TG5767/KX- TG5771/KX-TG5776/KX-TG5777 base unit.

1 Base unit:

Press and hold {INTERCOM} until the IN USE indicator flashes.

LAfter the IN USE indicator starts flashing, the rest of the procedure must be completed within 90 seconds.

2 Cordless camera:

Press PROG. (program) on the back side of the cordless camera with a pointed object such as a pen until a beep sounds.

LWhen registration is completed successfully, the cordless camera beeps and the indicator stops flashing red but remains lit in yellow- green (page 7).

Deregistering the cordless camera

The base unit can cancel the registration of a registered cordless camera.

Important:

LBefore deregistering, confirm the cordless camera’s extension number from the handset (color display models only: KX-TGA571).

Press {INTERCOM} on the handset to display its extension.

Base unit

1 Press and hold {INTERCOM} until the IN USE indicator flashes.

2 Press and hold the cordless camera's extension number ({1} – {8}) until a beep sounds.

Note:

LThe indicator color on the camera remains the same.

12For assistance, please visit http://www.panasonic.com/phonehelp

Image 12
Contents Operating Instructions Introduction Feature highlight Camera monitoring using the color display handsetIntroduction Accessory information Included accessoriesAccessory item Order number Quantity Sales and support informationImportant safety instructions InstallationMedical Conditions for using the cordless camera For best performanceAvoiding noise EnvironmentUnderstanding the cordless camera indicator ControlsStatus Description Setting up the cordless camera Connecting the AC adaptor and the call buttonAdjusting the cordless camera lens angle Setting the DIP switches DIP switch Function On defaultDisplaying the image upside down DIP switch Selecting the cordless camera speaker volume DIP switchSymbols used in these operating instructions Symbol MeaningExample Registering the cordless camera Deregistering the cordless cameraBase unit Cordless cameraAdjusting receiver/speaker volume Talking to the paged party using the cordless cameraMonitoring the cordless camera from a handset HandsetPaging using the cordless camera audio sensor Paging the handsets from the cordless cameraUseful settings while camera monitoring Adjusting the display brightnessSelecting image zoom Setting the audio detection sensitivity SaveConnecting the wall-mounting adaptor Wall mountingMounting the cordless camera on the wall Standard mountingUpside down mounting Removing the wall-mounting adaptor About the screws for wall mountingWall mount template for the cordless camera Troubleshooting Problem Cause & solutionUseful Information FCC and other information FCC RF Exposure WarningSpecifications Customer services Customer Services DirectoryWarranty San Gabriel Industrial ParkAve de Infantería, Km One Panasonic Way Secaucus, New JerseyLimited Warranty Limits And Exclusions Index When you ship the product Panasonic Puerto Rico, IncCopyright