Panasonic SDR-H250EB operating instructions 102

LSQT1211(PAL_ENG).book 102 ページ ２００７年２月１３日 火曜日 午後１時１４分

Others

Problem

Check points

	≥ Is this unit connected to a computer?
The indication	# No operation can be performed on this unit when it is connected
	to a computer.
disappears.
	≥ Turn off the power to this unit. If the power cannot be turned
The screen is frozen.	off, remove the SD card then press the RESET button, or
No operation can be	remove the battery or AC adaptor and then reattach it. After
	that, turn on the power again. If normal operation is still not
performed.
	restored, detach the power connected, and consult the dealer
	who you purchased this unit from.
	≥ The unit has automatically detected an error. Remove the SD
	card then press the RESET button to restart the unit.
	# (SDR-H250) Press the RESET button with the projecting part of
	the grip belt A.
	A

	# (SDR-H20) Press the RESET button with the projecting part of
“PUSH THE RESET	the lens cap B.
SWITCH.” is displayed.	B

	≥ If you do not press the RESET button, the power to this unit is
	turned off automatically about 1 minute later.
	≥ Even after you press the RESET button, the indication may still
	appear repeatedly. If so, this unit needs repair. Detach the
	power connected, and consult the dealer who you purchased
	this unit from. Do not attempt to repair the appliance by
	yourself.
If the SD card is inserted	≥ Is the SD card formatted on a computer inserted?
in this unit, it is not	# Use this unit to format SD cards. Please be aware that if an SD
	card is formatted, then all the data recorded on the card will be
recognised.
	erased. (l 70)
If the SD card is inserted	≥ Check that the device is compatible with the capacity or type of
in another device, it is not	SD card (SD Memory Card/SDHC Memory Card) that you
	inserted.
recognised.
	# Refer to the operating instructions of the device for details.

102

LSQT1211