Panasonic DMCFS3K Intelligent ISO, Sensitivity, Applicable modes ·, ISO sensitivity 100 1600

Advanced (Recording pictures)

Note

•The ends of the recorded pictures may be cut at printing so check before printing. (P102)

[INTELLIGENT ISO]

For details on [REC] mode menu settings, refer to P19.

The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the scene to minimize the jitter of the subject.

Applicable modes: ·

[OFF]/[ ISOMAX400 ]/[ ISOMAX800 ]/[ ISOMAX1600 ]

•The upper limit of the ISO sensitivity can be set.

•The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise.

Note

•Depending on the brightness and how fast the subject is moving, jitter may not be avoided.

•Movements may not be detected when a moving subject is small, when a moving subject is at the edge of the screen or when a subject has moved at the very moment when the shutter button was pressed fully.

•To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting [COLOR MODE] to [NATURAL]. (P66)

>[SENSITIVITY]

For details on [REC] mode menu settings, refer to P19.

This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark.

Applicable modes: ·

[AUTO]/[100]/[200]/[400]/[800]/[1600]

ISO sensitivity	100	1600
Recording location	When it is light (outdoors)	When it is dark
(recommended)
Shutter speed	Slow	Fast
Noise	Less	Increased

Note

•When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400] according to the brightness. (It can be adjusted to a maximum of [ISO1000] when using the flash.)

•The sensitivity automatically switches to between [ISO1600] and [ISO6400] in [HIGH SENS.] in scene mode.

•The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)

•To avoid picture noise, we recommend that you either reduce the maximum ISO sensitivity level or set [COLOR MODE] to [NATURAL], and then take pictures. (P66)

VQT1M97 61