Panasonic DMC-LZ2PP Optical Image Stabilizer, Optical image stabilizer button, MODE2, Off

Page 46

Recording pictures (basic)

Optical Image Stabilizer

SCN1 SCN2

∫Demonstration of the optical image stabilizer (Demonstration Mode)

This mode recognizes and compensates jitter. You can reduce blurring caused by jitter especially when you take pictures with the optical zoom set to Tele or when you take pictures indoors where the shutter speed is slowed down.

A: Optical image stabilizer button

1 Press the optical image stabilizer button A until [STABILIZER] appears and then select the stabilizer function mode.

STABILIZER

OFF

MODE1

MODE2

SELECT DEMO. MENU SET

MODE1

The stabilizer operates

(

 

)

 

continuously and can assist

 

 

 

 

 

during photo composition.

 

 

 

 

MODE2

The stabilizer function is in

(

 

)

 

standby and activates at the

 

 

 

 

 

moment the shutter captures the

 

 

 

 

image. This mode offers a

 

 

 

 

greater degree of stabilization.

 

 

 

 

 

OFF

 

 

When image stabilization is not

(

 

 

)

needed or when using the

 

 

 

 

 

 

camera with a tripod.

 

 

 

 

 

When you press the [MENU] button, the demonstration appears. After the demonstration ends, the screen returns to the stabilizer function mode selection menu. If you want to exit the demonstration halfway through, press the [MENU] button again.

While the demonstration is displayed, the optical zoom is fixed to Wide (1k) and the zoom function cannot be activated.

Moreover, you cannot take pictures.

•The stabilizer function may not work sufficiently in the following cases.

–When too much jitter occurs.

–In digital zoom range.

–When taking pictures while following subjects in motion.

–When the shutter speed is extremely slow due to dark conditions or other reasons.

Be careful of jittering when pressing the shutter button.

•In simple mode [], the stabilizer function mode is fixed to [MODE1] and the

stabilizer function menu does not appear.

•In motion image mode [ ], [MODE2] cannot be set.

46

VQT0P65

Page 45 Page 47
Image 46
Page 45 Page 47
Contents DMC-LZ1PP Information for Your Safety Dear CustomerDMC-LZ2 FCC Note U.S. onlyDMC-LZ1 About Condensation When the lens Is fogged up About the LensIf you will not be using the camera for a long time About illustrations in these operating instructions About These Operating InstructionsAbout illustrations of the cursor button Contents Slide Show Rotate DispDpof Print TrimmingStandard Accessories CD-ROMNames of the Components 13 14 Quick Guide Play back the picturesAbout the Batteries When oxyride batteries are selectedWhen alkaline/Ni-MH batteries are selected Usable batteriesShapes of batteries that cannot be used Battery indicationUnusable batteries Proper Care and Handling BatteriesPreparation Recording conditions by Cipa standard When you do not use batteries for a long period of timeBattery life SecondsPlayback time Inserting/Removing the Batteries Inserting/Removing the Card Optional Slide the card door to open itBuilt-in Memory About the Built-in Memory/the CardHttp//panasonic.co.jp/pavc/global/cs Access to the built-in memory or the card Approximate number of recordable pictures and the size CardSelect M/D/Y, D/M/Y or Y/M/D Setting Date/Time Clock SetInitial setting Set date and timeAbout the Setup Menu Battery Type Alkaline LR6/Ni-MHNo operational sound Economy Economy mode onlyPlayback mode only P84 Soft operational soundScene Menu Playback mode P49 Recording mode P31Simple mode P35 About the LCD MonitorHistogram Recording guide lineExample of histogram Taking Pictures SCNTake a picture Turn the camera on Select normal picture modeNormal recording AF/AE Lock AF Auto focus AE Auto exposure Jitter camera shake FocusingDirection detection function Exposure Select the desired item and set the desired value Taking Pictures in Simple ModeSettings in Simple mode PICT.MODE MailOther Settings in Simple mode PICT.SIZE Quality NO.RESET Reset USB Mode Video OUT LanguageCOL.EFFECT PICT.ADJ Press Checking the Recorded Picture ReviewEnlarge and shift the picture To make subjects appear further away use Wide Using the Optical ZoomTo make subjects appear closer use Tele Taking Pictures using the Built-in Flash ISO64 Available flash settings by recording modeISO80 Do not stare at the photo flash from close proximity Select the self-timer mode Taking Pictures with the Self-timerTake the picture Under exposed Compensating the ExposureProperly exposed Over exposed Taking Pictures using Auto Bracket MODE2 Optical Image StabilizerOptical image stabilizer button OFFNumber of pictures recorded in burst mode Taking Pictures using Burst ModeSelect the burst mode When the burst mode setting is set to UnlimitedRecording pictures basic Playing Back Pictures Select the pictureSelect the pictures Switch to multi screenPictures Multi Playback To return to the normal playbackShift the picture Using the Playback ZoomRotate the zoom lever towards To enlarge the picture ZoomDelete the picture Deleting PicturesSelect the picture to be deleted Select Multi DeleteSelect ALL Delete Delete the picturesDelete all of the pictures To delete all picturesUsing the Mode Dial Economy modeSelect Motion Rate Motion image modePress the shutter button fully to start the recording Available recording time seconds You cannot record audio on DMC-LZ1Scene mode Night Scenery P59 Night Portrait P60Technique for Portrait mode To make this mode more effective Technique for Sports modeScenery mode Technique for Night scenery modeTechnique for Night portrait mode Use the flash Technique for Fireworks modeParty mode Technique for Party modeUsing the REC mode menu White Balance W.BALANCE Auto White BalanceAbout the white balance fine adjustment Setting the White Balance manually White setAbout the white balance ISO sensitivity 400 ISO Sensitivity SensitivityPicture Size PICT.SIZE HdtvAudio Recording Audio REC Quality QualityAF Mode AF Mode Digital Zoom D.ZOOM Slow shutter SettingExample Picture Adjustment PICT.ADJ Color Effect COL.EFFECTPlaying Back Pictures with Audio/Motion Images To pauseUsing the Play mode menu Rotating the Picture Rotate Example When rotating clockwiseSelect on to set it Select the picture to be rotated and set itSelect SINGLE, Multi or Cancel Setting the Picture to be Printed and the NumberSelect the direction to rotate the picture To cancel all settings Select YES to cancel all settings To print the datePreventing Accidental Erasure of the Picture Protect CancelSET Select Start Playing Back with Slide ShowSet the items of the Slide Show By pressing the Menu button, the Slide Show stopsSelect the picture and start audio recording SD Slide ShowSelect the picture and set it Stop audio recordingResizing the Pictures Resize Select the size and set itSelect YES or no and set it Trimming the PicturesSelect the picture to trim and set it Enlarge or decrease the picture Shift the picture and press the shutter button to setSelect pictures to be copied and set them Copying Picture Data CopySelect the direction to copy the picture data Select YES and set itInitializing the Built-in Memory Card Format Select YES to format the mediumPlayback advanced Playing back pictures with Supplied cable Playing Back Pictures on a TV ScreenPlayback pictures on TV with SD Memory Card slot Select USB Mode Before Connecting to the PC or the PrinterUSB Mode Select PC or PictBridge PTPWindows Connecting to a PCMacintosh Dcim PictBridge PTP settingFolder Composition MiscPICTURE. P89 Connecting to a PictBridge-compliant PrinterPICTURE. P90 Select a picture to be printed Set the print settingsSingle picture Select Dpof Picture Select Print Start and then print out the pictureDpof picture Setting the date printing with the Dpof print in advance Screen Display RecordingRecording in simple mode 1000001 PlaybackOthers When you go out, bring spare batteries Dispose of unusable batteriesMessage Display No Additional Delete Selections can be MadeMemory Card Error Recording Picture cannot be recorded TroubleshootingCamera cannot be operated even when it is turned on Subject is not focused properlySome pixels are inactive or always lit on the LCD monitor LCD monitorScreen is too bright or dark Noise appears on the LCD monitorClock setting is reset When connecting to a PC, pictures cannot be transferredSetting for the auto review function is disabled Others Unreadable language was selected by mistakeSpecifications Operating Temperature DimensionsWeight FlashDigital Camera Accessory System Accessory#Digital Camera Accessory Order Form For USA CustomersRequest for Service Notice For USA Only Limited Warranty For USA Only Limited Warranty CoverageCarry-In or Mail-In Service Customer Services Directory For USA Only Centralized Factory ServicenterIndex Audio Recording DMC-LZ2 onlyNumerics Playing Back Motion ImagesEncienda la cámara para tomar las imágenes Spanish Quick Use Guide/Guía rápida en españolInserte las baterías Reproduzca las imágenesMemo 114 115 Panasonic Puerto Rico, Inc Panasonic Canada Inc
Top Page Image Contents