Panasonic DMC-LZ2PP Connecting to a PictBridge-compliant Printer, PICTURE. P89, PICTURE. P90

Page 88

Connecting to a PC or Printer

Connecting to a PictBridge-compliant Printer

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor.

Set the print settings such as print quality on the printer beforehand. (Read the printer operating instructions.)

DIGITAL

AV OUT

DC IN

3V

A: USB connection cable (supplied)

B: AC adaptor (DMW-AC1; optional)

1 Turn the camera on and then set [USB MODE] on the [SETUP] menu to [PictBridge (PTP)]. (P85)

2 Turn on the printer.

3 Connect the camera to a printer via the USB connection cable A (supplied).

•Connect the USB connection cable with the [] mark facing the [1] mark on the [DIGITAL] socket.

•Hold the plug C to push into or pull out.

When the DPOF

Select [SINGLE

Print is not set.

PICTURE]. (P89)

When the DPOF

Select [DPOF

Print is set. (P73)

PICTURE]. (P90)

•It may take time to print some pictures. Therefore, use batteries with sufficient battery power (P14) or the AC adaptor (DMW-AC1; optional) when you connect to a printer.

•If the remaining battery power becomes low during communication, the status indicator blinks and the alarm beeps. In this case, stop the communication at once.

•Disconnect the USB connection cable after printing.

•Do not use any other USB connection cables except the supplied one.

•If the card is not inserted when the camera is connected to a printer, you can edit or access the picture data in the built-in memory. If the card is inserted, you can edit or access the picture data in it.

•You cannot switch the recording medium between the built-in memory and the card while the camera is connected to the printer. When you want to switch the recording medium, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

88

VQT0P65

Image 88

Contents DMC-LZ1PP Information for Your Safety Dear CustomerDMC-LZ2 FCC Note U.S. onlyDMC-LZ1 About Condensation When the lens Is fogged up About the LensIf you will not be using the camera for a long time About illustrations in these operating instructions About These Operating InstructionsAbout illustrations of the cursor button Contents Rotate Disp Dpof PrintSlide Show TrimmingStandard Accessories CD-ROMNames of the Components 13 14 Quick Guide Play back the picturesWhen oxyride batteries are selected When alkaline/Ni-MH batteries are selectedAbout the Batteries Usable batteriesBattery indication Unusable batteriesShapes of batteries that cannot be used Proper Care and Handling BatteriesPreparation When you do not use batteries for a long period of time Battery lifeRecording conditions by Cipa standard SecondsPlayback time Inserting/Removing the Batteries Inserting/Removing the Card Optional Slide the card door to open itBuilt-in Memory About the Built-in Memory/the CardHttp//panasonic.co.jp/pavc/global/cs Access to the built-in memory or the card Approximate number of recordable pictures and the size CardSetting Date/Time Clock Set Initial settingSelect M/D/Y, D/M/Y or Y/M/D Set date and timeAbout the Setup Menu Battery Type Alkaline LR6/Ni-MHEconomy Economy mode only Playback mode only P84No operational sound Soft operational soundScene Menu Recording mode P31 Simple mode P35Playback mode P49 About the LCD MonitorHistogram Recording guide lineExample of histogram Taking Pictures SCNTake a picture Turn the camera on Select normal picture modeNormal recording AF/AE Lock AF Auto focus AE Auto exposure Jitter camera shake FocusingDirection detection function Exposure Taking Pictures in Simple Mode Settings in Simple mode PICT.MODESelect the desired item and set the desired value MailOther Settings in Simple mode PICT.SIZE Quality NO.RESET Reset USB Mode Video OUT LanguageCOL.EFFECT PICT.ADJ Press Checking the Recorded Picture ReviewEnlarge and shift the picture To make subjects appear further away use Wide Using the Optical ZoomTo make subjects appear closer use Tele Taking Pictures using the Built-in Flash ISO64 Available flash settings by recording modeISO80 Do not stare at the photo flash from close proximity Select the self-timer mode Taking Pictures with the Self-timerTake the picture Under exposed Compensating the ExposureProperly exposed Over exposed Taking Pictures using Auto Bracket Optical Image Stabilizer Optical image stabilizer buttonMODE2 OFFTaking Pictures using Burst Mode Select the burst modeNumber of pictures recorded in burst mode When the burst mode setting is set to UnlimitedRecording pictures basic Playing Back Pictures Select the pictureSwitch to multi screen Pictures Multi PlaybackSelect the pictures To return to the normal playbackUsing the Playback Zoom Rotate the zoom lever towards To enlarge the pictureShift the picture ZoomDeleting Pictures Select the picture to be deletedDelete the picture Select Multi DeleteDelete the pictures Delete all of the picturesSelect ALL Delete To delete all picturesUsing the Mode Dial Economy modeSelect Motion Rate Motion image modePress the shutter button fully to start the recording Available recording time seconds You cannot record audio on DMC-LZ1Scene mode Night Scenery P59 Night Portrait P60Technique for Portrait mode To make this mode more effective Technique for Sports modeScenery mode Technique for Night scenery modeTechnique for Night portrait mode Use the flash Technique for Fireworks modeParty mode Technique for Party modeUsing the REC mode menu White Balance W.BALANCE Auto White BalanceAbout the white balance fine adjustment Setting the White Balance manually White setAbout the white balance ISO Sensitivity Sensitivity Picture Size PICT.SIZEISO sensitivity 400 HdtvAudio Recording Audio REC Quality QualityAF Mode AF Mode Digital Zoom D.ZOOM Slow shutter SettingExample Picture Adjustment PICT.ADJ Color Effect COL.EFFECTPlaying Back Pictures with Audio/Motion Images To pauseUsing the Play mode menu Example When rotating clockwise Select on to set itRotating the Picture Rotate Select the picture to be rotated and set itSelect SINGLE, Multi or Cancel Setting the Picture to be Printed and the NumberSelect the direction to rotate the picture To cancel all settings Select YES to cancel all settings To print the datePreventing Accidental Erasure of the Picture Protect CancelSET Playing Back with Slide Show Set the items of the Slide ShowSelect Start By pressing the Menu button, the Slide Show stopsSelect the picture and start audio recording SD Slide ShowStop audio recording Resizing the Pictures ResizeSelect the picture and set it Select the size and set itSelect YES or no and set it Trimming the PicturesSelect the picture to trim and set it Enlarge or decrease the picture Shift the picture and press the shutter button to setCopying Picture Data Copy Select the direction to copy the picture dataSelect pictures to be copied and set them Select YES and set itInitializing the Built-in Memory Card Format Select YES to format the mediumPlayback advanced Playing back pictures with Supplied cable Playing Back Pictures on a TV ScreenPlayback pictures on TV with SD Memory Card slot Before Connecting to the PC or the Printer USB Mode Select USB Mode Select PC or PictBridge PTPWindows Connecting to a PCMacintosh PictBridge PTP setting Folder CompositionDcim MiscPICTURE. P89 Connecting to a PictBridge-compliant PrinterPICTURE. P90 Select a picture to be printed Set the print settingsSingle picture Select Dpof Picture Select Print Start and then print out the pictureDpof picture Setting the date printing with the Dpof print in advance Screen Display RecordingRecording in simple mode 1000001 PlaybackOthers When you go out, bring spare batteries Dispose of unusable batteriesMessage Display No Additional Delete Selections can be MadeMemory Card Error Troubleshooting Camera cannot be operated even when it is turned onRecording Picture cannot be recorded Subject is not focused properlyLCD monitor Screen is too bright or darkSome pixels are inactive or always lit on the LCD monitor Noise appears on the LCD monitorWhen connecting to a PC, pictures cannot be transferred Setting for the auto review function is disabledClock setting is reset Others Unreadable language was selected by mistakeSpecifications Dimensions WeightOperating Temperature FlashDigital Camera Accessory System Accessory#Digital Camera Accessory Order Form For USA CustomersRequest for Service Notice For USA Only Limited Warranty For USA Only Limited Warranty CoverageCarry-In or Mail-In Service Customer Services Directory For USA Only Centralized Factory ServicenterIndex Audio Recording DMC-LZ2 onlyNumerics Playing Back Motion ImagesSpanish Quick Use Guide/Guía rápida en español Inserte las bateríasEncienda la cámara para tomar las imágenes Reproduzca las imágenesMemo 114 115 Panasonic Puerto Rico, Inc Panasonic Canada Inc