3 1: Close the card/battery door.
2: Slide the release lever in the direction of the arrow.
•If the card/battery door cannot be completely closed, remove the card, check its direction and then insert it again.
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
1
2
Turn the camera on.
•When you turn the camera on, [PLEASE SET THE CLOCK] message appears. (It does not appear in Playback Mode.)
A[MENU/SET] button B Cursor buttons
Press [MENU/SET].
OFFON
A
B
3
4
Press w/q to select the items (year, month, day, hour, minute, display sequence or time display format), and press e/r to set.
C Time at the home area | Cq |
D Time at the travel destination | Dw |
4: Cancel without setting the clock. |
|
• Select either [24HRS] or [AM/PM] for the |
|
time display format. |
|
• AM/PM is displayed when [AM/PM] is |
|
selected. |
|
Press [MENU/SET].
•After completing the clock settings, turn the camera off. Then turn the camera back on, switch to Recording Mode, and check that the display reflects the settings that were performed.
•When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the “Changing the clock setting” procedure.
(ENG) VQT2T42 13