Panasonic DMC-F2 Picture size Still picture, Motion pictures, Quality, Interface Digital

Page 25

Picture size

 

Still picture:

[+10M] 3648 × 2736 pixels,

 

[+5M] 2560 × 1920 pixels,

 

[+3M] 2048 × 1536 pixels

 

[*9M] 3648 × 2432 pixels,

 

[*2.5M] 2048 × 1360 pixels

 

[}7.5M] 3648 × 2056 pixels,

 

[}2M] 1920 × 1080 pixels

Motion pictures:

[WVGA] 848 × 480 pixels (When a card is used.),

 

[VGA] 640 × 480 pixels (When a card is used.),

 

[QVGA] 320 × 240 pixels

Quality:

Fine/Standard

Recording file format

 

Still Picture:

JPEG (based on “Design rule for Camera File system”,

 

based on “Exif 2.21” standard)/DPOF corresponding

Motion pictures:

“QuickTime Motion JPEG” (motion pictures with audio)

Interface

 

Digital:

USB 2.0 (Full Speed)

Analog video / audio:

NTSC / Audio line output (monaural)

Terminal

 

AV OUT/DIGITAL:

Dedicated jack (8 pin)

Dimensions:

97.6 mm (W) × 55.4 mm (H) × 24.8 mm (D)

 

(3.84˝ (W) × 2.18˝ (H) × 0.98˝ (D))

 

(excluding the projection part)

Mass (Weight):

Approx. 112 g/0.25 lb

 

(excluding Memory Card and battery)

 

Approx. 134 g/0.30 lb

 

(with Memory Card and battery)

Operating Temperature:

0 °C to 40 °C (32 °F to 104 °F)

Operating Humidity:

10% to 80%

(ENG) VQT2T42 25

Image 25
Contents Basic Operating Instructions Dear Customer Information for Your SafetyDMC-F2 FCC Note„ About the battery charger „ About the battery packBattery charger „ Cautions for Use „ About cards that can be used in this unit „ About Condensation When the lens is fogged up„ About illustrations in these operating instructions Contents CD-ROM Standard AccessoriesNames of the Components Attach the battery paying attention to the direction Charging the BatteryBattery Connect the charger to the electrical outlet Detach the battery after charging is completedRecording conditions by Cipa standard „ When the Charge indicator flashesArrow and open the card/battery door Inserting/Removing the Battery/Card OptionalBattery Insert it fully being careful about Slide the release lever in the directionClock is not set when the camera is shipped Setting Date/Time Clock SetTurn the camera on Press MENU/SETMode switching About the Mode and Menu OperationPress MENU/SET to display the menu About the menu operationPress e/r to select a menu item Setting Press e/r to select a settingPress q Press MENU/SET to confirm yourTaking Pictures Using the Automatic Function „ Face detection Scene detection„ The backlight compensation Focusing Taking Pictures with Your Favorite SettingsSlide the recording/playback switch a to Playing Back Pictures Normal Playback ModePress w/ q to select the picture To delete a single picture Deleting PicturesSelect the picture to be deleted, and then press Press w to select YES and then pressInstructions supplied To return to the install menuWith the desired language inside the folder WindowsSpecifications ISO sensitivity Metering modeShutter speed White balanceMass Weight DimensionsPicture size Still picture Motion pictures65 a Equipment mobility Movable Battery Pack lithium-ionVoltage/capacity Minimum SD Memory Card Digital Camera Accessory SystemSdhc Memory Card Accessory # Description Price Each Quantity Total Price Digital Camera Accessory Order FormProduct or Part Name Parts Labor Limited Warranty Coverage For USA and Puerto Rico OnlyLimited Warranty Limits And Exclusions Mail-In ServicePanasonic Exchange Center George McVay Drive Suite B ENG VQT2T42 Customer Services Directory United States and Puerto Rico ENG VQT2T42