Before Use
Inserting a Cassette
1Slide the [OPEN/EJECT] Lever (38) toward the front and pull down to fully open the Cassette Compartment Cover.
≥To protect the tape, if the cover is not fully opened, the cassette cannot be ejected.
OPEN/ EJECT | (38) |
|
2Insert a Cassette.
3Close the Cassette Holder by pressing the [PUSH] mark 1.
1
PUSH
4Close the Cassette Compartment Cover.
ªAccidental Erasure Prevention
Opening the accidental erasure prevention slider 1 on the cassette (by sliding it to the [SAVE] arrow direction) prevents recording. To enable recording, close the accidental erasure prevention slider (by sliding it to the [REC] arrow direction).
1
R E C
SAVE
≥For other notes concerning this item, see
Using a Card (NV-GS15 only)
A Card can be used to record pictures.
Before inserting or removing a Card, be sure to turn off the Movie Camera.
≥Otherwise, the Movie Camera may not function properly or it may cause the loss of recorded data in a Card.
ªInserting a Card
1Slide the [OPEN] Lever (3) to open the Card Slot Cover (5).
(3)
(5)
OPEN
2While holding the Memory Card with its cut corner facing right 1, insert it into the Card Slot (4).
(4)
1
3Close the Card Slot Cover (5) securely.
Removing the Card
Open the Card Slot Cover and press the centre of the Card and then pull it straight out.
≥After removing the Card, close the Card Slot
Cover.
≥The Movie Camera may be damaged if the Card is forced out when the Card is fully inserted.
ªCard Access Lamp (14)
RESET
(14)
While the Movie Camera is accessing the Card (reading, recording, playback or erasing), Card Access Lamp lights up.
≥While Card Access Lamp is on, never attempt to open the Card Slot Cover, to pull out the Card, to turn off the Movie Camera, or to turn the Mode Dial. Such actions will damage the Card, and recorded data, and cause the Movie Camera to malfunction.