Panasonic NV-GS15GN, NV-GS11GN Recording from a Tape onto a Card NV-GS15 only, Audio Dubbing

Editing Mode

Editing Mode

Recording from a Tape onto a Card (NV-GS15 only)

Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette.

1Set the Mode Dial (39) to Tape Playback

Mode.

(39)

2Start playback and set the Movie Camera to Still Playback Mode at the scene you wish to record, and press the [PHOTO SHOT] Button (36).

(36)

PHOTO SHOT

Recording Pictures from a Card onto a Tape (NV-GS15 only)

Card Images can be recorded to the Tape.

1Set the Mode Dial (39) to Picture Playback

Mode.

(39)

2Display the first picture.

3Press the [PHOTO SHOT] Button (36).

(36)

PHOTO SHOT

≥During the copying, the following Indication appears.

NOW RECORDING

≥It takes a few seconds to record a picture to the Tape.

≥When recording to tape, select the tape position before recording. The picture will be recorded to the tape position when the [PHOTO SHOT] Button is pressed at Step 3.

≥Photoshot index signals are automatically recorded.

≥For other notes concerning this item, see -52-.

Audio Dubbing

You can add music or narration to the recorded Cassette.

≥If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you wish to

preserve the original sound, use the [12bit] Mode when recording.)

≥Audio Dubbing cannot be performed on a recording made in LP Mode. (-18-)

1Set [TAPE PLAYBACK MENU] >>

[AV IN/OUT] >> [AV JACK] >> [IN/OUT].

(20)

2Continuing the aforesaid setup, select [A.DUB INPUT] >> [MIC] or [AV IN].

≥Set to [AV IN] when external device is used, and to [MIC] when an external or built-in microphone is used.

3Press the [;] Button (70) on the Remote

Controller where you want to add new sound.

MULTI/				T
P-IN-P	¥REC	A.DUB	r	(56)
			sVOL
V/REW	PLAY	FF/W		W
6	1	5
STILL ADV	PAUSE	STILL ADV		(70)
E	;	D
INDEX	STOP	INDEX		P.B. ZOOM
K	∫	L

4Press the [A.DUB] Button (56) on the

Remote Controller.

5To start Audio Dubbing, press the [;] Button (70) on the Remote Controller.

To Cancel Audio Dubbing

Press the [;] Button (70) on the Remote Controller.

The Movie Camera is in the Still Playback Mode again.

-40-