Useful Features (continued)
- Self Timer/Time Lapse Recording
The Self Timer/Time Lapse switch slides to the right to select one of three recording overlays. Pressing the Record/Pause button activates the selected mode. When recording stops, the Movie will return to the Record/Pause mode.
In the Record/Pause mode slide Self Timer/Time Lapse Switch once
t
(LF.II1
Slide twice
4,
IT LAPSE 1
Self Timer Recording
•Select "Self- 10S"
Indicates that a 10 second recording will begin 10 seconds after you press the Record/Pause button. Press the Record/Pause button again to cancel the recording in progress.
•Select
Indicates that a continuous recording to the end of the tape will begin 10 seconds after you press the Record/Pause button. Press the Record/Pause
button again to cancel the recording in progress.
Time Lapse Recording
=Select "T.LAPSE"
Press the Record/Pause button.
Your Movie will start to record at once. A one second frame of the scene will be recorded each minute. As shown in the diagram below, your recording will have continuous Time Lapse images of the scene. Press the Record/Pause button again to cancel the recording in progress.
I | Slide fourItimes |
Note:
This camera is not designed for industrial use of the Time Lapse Feature. Please keep the following _oints in mind.
=Avoid using the unit solely for Time Lapse recording. A ten hour duration of Time Lapse recording will record 10 minutes of the Time Lapse specia! effect.
After this period, the unit will automatically turn itself off.
59 SECOND PAUSE (approx.)
•The battery pack is not designed for continuous Time Lapse use. For extended periods of time lapse recording it is recommended that an alternate power source be used.
=The Self Timer/Time Lapse switch has no effect if pressed during normal recording.
24