Before Using
Before Using
Standard Accessories
The followings are the accessories supplied with the Camcorder.
1) |
|
|
K2GJ2DC00011 K2CA2CA00025 | ||
2) | 3) | 4) |
K2KC4CB00020 | LSFC0018 | |
5) |
|
|
|
|
1) AC Adaptor, DC Cable and AC Cable (p. 11)
CAUTION:
This unit will operate on 110/120/220/240 V AC. An AC plug adaptor may be required for voltages other than 120 V AC. Please contact either a local or foreign electrical parts distributor for assistance in selecting an alternate AC plug.
We recommend using the accessory power plug adaptor (VJSS0070/KZDB4ZE00001) in an area which has special AC outlets.
2)Battery Pack (p. 12)
3)AV Cable (pp. 36, 37)
4)Shoulder Strap (p. 13)
5)Mini DV Tape (60 min.) (p. 14)
How to Turn off the Demo Mode
To terminate the demonstration mode, insert a cassette or set the [ DEMO MODE] to [OFF] as follows.
1 Set [ SETUP] >> [ DEMO MODE] >> [OFF].
Parts Identification and Handling
Camcorder
3
2
4
5
1
6 7 8 9
1LCD Monitor Open Knob [OPEN▼] (p. 17)
2LCD Monitor (pp. 17, 57)
Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD Monitor screen.
However, this is not a malfunction and does not affect the recorded picture.
3Speaker (p. 32)
4DC Input Jack [DC IN] (p. 11)
5Battery Holder
6Card Slot Cover Open Lever [◄OPEN] (p. 14)
7Card Slot Cover (p. 14)
8Card Slot (p. 14)
9Card Access Lamp (p. 15)
10 | 13 |
|
11
12
14
15
10Lens Hood (p. 57)
11Lens
12Microphone
13Zoom Lever [W/T] (pp. 25, 26)
Volume Lever [– / VOL +] (pp. 32, 33)
14White Balance Sensor (p. 30)
15
•Connecting an AV Cable to this jack activates the Camcorder’s
•When connecting the pin plug of the AV Cable to this jack, plug it in as far as it goes.
10 | For assistance, please call : |
|