Panasonic PV-GS32 operating instructions „ Optimal Use of the Battery, „ Cautions for Storage

Page 56

Others

If the dirty heads cannot be cleaned with the Head Cleaner, the Camcorder needs to be cleaned at a Servicenter. Please consult a dealer.

Head cleaning due to dirty heads is not considered a malfunction of the product. It is not covered by the warranty.

Periodical Check-up

To maintain the highest image quality, we recommend replacement of worn parts, such as heads, etc., after approximately 1000 hours of use. (This, however, depends on operating conditions, such as temperature, humidity, dust, etc.)

„Optimal Use of the Battery

Battery Characteristics

This Battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity, and, if the temperature is too high or too low, the operating time of the Battery becomes shorter. If the Battery is used in an extremely cold environment, the Battery may operate only for about 5 minutes.

If the Battery becomes extremely hot, a protective function may operate, and the Battery may become unusable for a while.

Be Sure to Detach the Battery after Use

Be sure to detach the Battery from the Camcorder. (If it is left attached to the Camcorder, a minute amount of current is consumed even when the Camcorder power is off.) If the Battery is left attached to the Camcorder for a long time, over-discharge takes place. The Battery may become unusable after it is charged.

Disposing of an Unusable Battery

The Battery has a limited life.

Do not throw the Battery into fire because it may cause an explosion.

Always Keep the Terminals of the Battery Clean

Prevent the terminals from getting clogged with dirt, dust, or other substances. If you drop the Battery accidentally, check to see if the Battery body and terminals are deformed. Attaching a deformed Battery to the Camcorder or AC Adaptor may damage the Camcorder or AC Adaptor.

„Cautions for Storage

Before storing the Camcorder, take the Cassette out and detach the Battery.

Store all the components in a dry place with a relatively stable temperature.

(Recommended Temperature: 15 °C to 25 °C (59 °F

to 77 °F), Recommended Humidity: 40 % to 60 %)

Camcorder

Wrap it with a soft cloth to prevent dust from getting into the Camera.

Do not leave the Camcorder in places that expose it to high temperature.

Battery

Extremely high temperatures or low temperatures will shorten the life of the Battery.

If the Battery is kept in smoky or dusty places, the terminals may rust and cause malfunctions.

Do not allow the Battery terminals to come in contact with metal objects (such as necklaces, hairpins, etc.). This can result in a short circuit or heat generation and, if you touch the Battery in this condition, you may be badly burned.

Store the Battery in a completely discharged state. To store the Battery for a long period of time, we recommend you charge it once every year and store it again after you completely use up the charged capacity.

Cassette

Before storing it, rewind the tape to the beginning. If the Cassette is left for more than 6 months with the tape stopped midway, the tape sags (although it depends on the storage condition). Be sure to rewind to the beginning.

Store the Cassette in its case. Dust, direct sunlight (ultraviolet rays), or humidity may damage the tape. Dust contains hard mineral particles, and dusty Cassettes damage the heads of the Camcorder and other components. Develop a habit of returning the Cassette back to its case.

Once every half year, wind the tape to the end and then rewind it to the beginning. If the Cassette is left for 1 year or longer without winding or rewinding, temperature and humidity changes may cause the Cassette to deform due to swelling, shrinking, and so forth. The wound tape may stick to itself.

Do not place a Cassette near highly magnetic substances or equipment.

The surface of tape is covered with extremely minute magnetic particles, upon which signals are recorded. Magnetic necklaces, toys, etc., have magnetic force that is stronger than you may normally expect, and they may erase the contents of a recording or may cause noise in images and sounds.

Card

When the Card is being read, do not remove the Card, turn off the power, or subject it to vibration or impact.

Do not leave the Card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated.

Do not bend or drop the Card. The Card or the recorded content may be damaged.

After use, be sure to remove the Card from the Camcorder.

After usage, store the supplied SD Memory Card in the enclosed bag.

Do not touch the terminals on the back of the Card with your fingers. Do not allow dirt, dust or water to enter it.

Keep the Memory Card out of reach of children to prevent swallowing.

56

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

 

Image 56
Contents Operating Instructions Above markings are located on the appliance bottom cover Safety PrecautionsThings You Should Know FCC Caution Telephone Number PANA7262FCC Note Important Safety Instructions Precautions USE & LocationContents Lock Setting Using Camcorder with a PCUninstall Problems and SolutionsUsing the Viewfinder Inserting a CardRecording on a Tape Lights upPlaying Back a Card Recording a Still Picture on Card PhotoshotPlaying Back a Tape Standard Accessories Parts Identification and Handling„ Camcorder AC Adaptor, DC Cable and AC Cable pPower Supply Using the AC AdaptorBuilt-in LED Light p Viewfinder ppUsing the Battery „ Disconnecting the Power SourceAttach the charged Battery to the Camcorder Charging Time and Available Recording TimeAdjust the length of the Grip Belt to the size of your hand To Use as a Grip BeltRe-attaching the Lens Cap Attaching the Shoulder StrapUsing a Memory Card Optional „ When the Cassette Holder does not come out„ When the Cassette Holder cannot be housed Accidental Erasure PreventionTurning on the Camcorder Easy to Use Mode DialHow to Use the Joystick Control Using the Viewfinder/LCD Monitor Using the Menu Screen Adjusting Brightness and Color LevelUsing the LCD Monitor „ To AdjustSelecting Language List of Menus12bit Audio LCD SETEVF SET Setting Date and Time Internal Lithium Battery RechargeSet to Tape/Card Recording Mode Set Basic Clock SET YES „ About date/timeLP Mode Audio Recording ModeSet to Tape Recording Mode Still Advance playback„ On-screen Display in the Tape Recording Mode Recording Simultaneous Motion/Still Record ModeAbout Recording Recording on a TapeRecording a Still Picture on a Card Photoshot Recording Yourself Recording with the Built-in LED Video LightRapidFire Consecutive Photoshot „ To Stop the RapidFire Consecutive Photoshot in ProgressZoom In/Out Functions Self-timer RecordingQuick Start Fade In/Out Functions Digital Zoom FunctionImage Stabilizer Function „ To Cancel Fading „ To Cancel the MagicPix FunctionBacklight Compensation Function MagicPix FunctionSoft-Skin Mode Recording in Special Situations Scene ModeWind Noise Reduction Function Cinema FunctionAdjusting White Balance Manually „ To Resume Automatic Adjustment„ To Cancel the Scene Mode Recording in Natural Colors White BalanceManual Shutter Speed Adjustment „ Range of Shutter Speed AdjustmentMove the Joystick Control or 33 to adjust the shutter speed About White Balance Sensor„ Range of Iris Adjustment Manual Iris Adjustment F NumberManual Focus Adjustment Adjusting the Sound Volume Playing Back a TapeFinding a Scene You Want to Play Back „ To Stop PlaybackStill Playback/Still Advance Playback Playing Back a Memory Card„ To Resume Normal Playback To Select a Desired File and Playing BackSlide Show Deleting the Files Recorded on a Card„ To Stop the Slide Show To Select and Delete Files„ About the Dpof Writing Printing Data on a Card Dpof SettingProtecting the Files on a Card Lock Setting Formatting a Card Playing Back on Your TVSet Advance Card Format YES Move the Joystick Control 33 to select the to stop playback„ Connecting with the AV Cable Recording from a Tape onto a CardCopying onto a DVD Recorder or a VCR Dubbing To record, and press the Photo Shot ButtonUsing the DV Cable for Recording Digital Dubbing „ To Cancel the Standby for RecordingPC Connection With DV Interface Cable „ To Stop DubbingUsing Camcorder with a PC Using the USB DriverConnecting the Personal Computer Camcorder Using Built-in SD Drive„ Windows 98SE Users Enter C\Windows\system\IOSUBSYSTo disconnect USB cable safely Double clickWindows XP/2000 Windows MeUsing as a Web Camera Installing the Video Stream DriverCommunication Speed Necessary software„ When you use the Camcorder as a Web Camera „ Windows 98SE/Me UsersSetting up the Windows Messenger Select DVC in the Microphone menu Setting up the MSN MessengerClick Sign Type in your Sign-in name and password If you no longer need software or driver Uninstall About the SD Memory CardSD Memory Card Optional Files recorded on an SD Memory CardAbout the compatibility of the card files MiscIndications „ To Change the Display Mode „ Power Save ModeInitializing the Modes „ To Display Date/Time Indication„ Concerning the Power Supply „ Alarm Sounds„ Inserting/Removing the Cassette „ Recording on a Card„ Self-timer Recording „ Recording with the Built-in LED Video Light„ Quick Start „ Zoom In/Out Functions„ Soft-Skin Mode „ Scene Mode„ Backlight Compensation Function „ MagicPix Function„ Manual Shutter Speed Adjustment „ Manual Iris Adjustment„ Lock Setting „ Playing Back„ Using the DV Cable for Recording Digital Dubbing „ After Use„ Cautions for Use „ About AC Adaptor„ Condensation „ Video Head Clogging and Care„ Optimal Use of the Battery „ Cautions for StorageBefore Requesting Service Problems and Solutions „ LCD Monitor/Viewfinder/Lens HoodCassette cannot be removed No operation other than cassette removal can be performedScreen has changed suddenly Cassette cannot be insertedPush the Reset Switch is displayed Playback picture is not clearCard Recorded pictures are not clear File recorded on a card cannot be deletedUsing the Reset button Explanation of Terms„ Digital Video System „ FocusSpecifications Digital CamcorderPrice Camcorder Accessory SystemAccessory # Description Camcorder Accessory Order Form VisaRequest for Service Notice Panasonic/Quasar Video Products Limited Warranty Limited WarrantyFor hearing or speech impaired TTY users, TTY Customer Services DirectoryCentralized Factory Servicenter Advertencia del FCC Spanish Quick Use Guide/Guía Para Uso RápidoNota Guía rápida Cómo utilizar la bateríaInserción de una tarjeta de memoria Cómo utilizar el visorReproducción de una tarjeta de memoria Grabación de una imagen fija en tarjeta PhotoshotReproducción de una cinta Index For questions regarding this promotion, call Panasonic ArcSoft Promotion, 20421 84th Ave S, Kent, WACut on dotted line One Panasonic Way Secaucus, New Jersey