Playing Back on Your TV
[VIDEO IN] 
[S-VIDEO IN]
[AUDIO IN]
1
2
1
A/V OUT
PHONES
REMOTE
By connecting your Movie Camera with your TV, the recorded scenes can be viewed on your TV screen.
≥Before connecting them, turn off the power of both the Movie Camera and TV.
1Connect the [A/V OUT] Socket of the Movie Camera and the Video and Audio Input Sockets of the TV.
≥Using the AV Cable 1, make a connection with the TV. If the TV has an
2(not supplied), too.
To Make the Indications Appear on the TV Screen
Press the [OSD] Button 3 on the Remote Controller.
| DATE/ | PHOTO | START/ |
3 | STOP | ||
OSD TIME | SHOT |
| |
| COUNTER RESET |
| ZOOM |
T
1 PLAY/MULTI
M-PLAY
STILL/
START/
DATE/ PHOTO STOP
OSD TIME SHOT
COUNTER RESET |
| ZOOM | ||
| ¥REC | A.DUB | T | |
| r | |||
|
|
| sVOL | |
V/REW | PLAY | FF/W | W | |
6 | 1 | 5 | ||
| ||||
STILL ADV | PAUSE/ITEM | STILL ADV |
| |
E | ; | D |
| |
INDEX | STOP/SET | INDEX |
| |
K | ∫ | L |
| |
~~~~~~~~~~~~~~~~~~~~~
Audio Dubbing
You can add music or narration to the recorded Cassette.
≥If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you
wish to preserve the original sound, use the [12bit] Mode when recording.)
≥Audio Dubbing cannot be performed on a recording done in LP Mode. (l19)
1Switch the Movie Camera over to the Still Playback Mode where you want to add new sound.
2Press the [A.DUB] Button on the Remote Controller.
≥The same setting can be done using [RECORDING SETUP]
3To start Audio Dubbing, press the [;] Button.
To Cancel Audio Dubbing
Press the [;] Button.
The Movie Camera is in the Still Playback Mode again.
To Play Back the Sound Recorded by 12bit Audio Dubbing
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
2 [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
3 ST2: It plays back only the sound added by Audio Dubbing. MIX: It plays back both the original sound and the sound added
by Audio Dubbing simultaneously.
≥For other notes concerning this item, see page 49.
35