Panasonic PV-GS150 Check the recording, Blank search function, To record still pictures clearly

Page 29

Record mode

You can select a picture quality for still pictures to be recorded. (-30-)

In tape recording mode, the size of pictures that can be recorded is [640].

In order to record higher quality still pictures, you must use the card recording mode.

If the wide mode is used, you cannot record images onto the card.

The [PHOTO SHOT] button does not work if it is pressed halfway.

Check the recording

The last image recorded is played back for 2 to

3 seconds. After checking, the Camcorder will be set to a recording pause.

Set to Tape Recording Mode.

1Press the joystick during the recording pause until the icon 1 appears.

2Move the joystick down to select the recording check icon [ ].

1

Blank search function

Searches for the last part of the image recorded (unused part of the tape).

Set to Tape Recording/Playback Mode.

1Set [BASIC] or [ADVANCE] >> [BLANK SEARCH] >> [YES].

ªStopping a blank search midway

through

Move the joystick down.

If the cassette tape has no blank part, then the Camcorder will stop at the end of the tape.

The Camcorder stops at a point approx. 1 second before the end of the last image recorded. When you start recording at that point, the image can be recorded seamlessly from the last image.

Recording still pictures onto a card (Photoshot)

Set to Card Recording Mode.

1Press the [PHOTO SHOT] button halfway in order to adjust focusing. (For auto focusing only)

The iris/gain value is fixed and this Camcorder focuses on the subject automatically.

PHOTO

SHOT

1

2

1Shutter chance mark

± (The white lamp flashes.): Focusing

¥ (The green lamp lights up.): When in focus

No mark: When focusing is unsuccessful The shutter chance mark is indicated as follows when the [PHOTO SHOT] button is not pressed halfway. Please use it as a guide for recording.

¥(The green lamp lights up.):

When in focus and a good picture can be recorded

±(White lamp lights up.): Almost in focus

2Focus area

2Press the [PHOTO SHOT] button fully.

ªTo record still pictures clearly

When zooming in on the subject with a magnification of 4k to 10k or higher, it is difficult to reduce the slight shaking from holding the Camcorder by hand. We recommend decreasing the zoom magnification and approaching the subject when recording.

When recording still pictures, hold the Camcorder firmly with your hands and keep your arms stationary at your side so as not to shake the Camcorder.

You can record stable pictures without shaking by using a tripod and the remote control.

29

LSQT0861

Image 29
Contents Operating Instructions AC Adaptor Things You Should KnowLSQT0861 Important Safety Instructions Precautions Before opening the CD-ROM package, please read the following Article 8 Termination of License Article 5 Reverse Engineering, Decompiling or DisassemblyContents Edit mode Playback modeWith a PC MenuQuick Guide Recording still pictures onto a card Photoshot Recording on a tapePlaying back tape Playing back cardCamcorder AccessoriesParts identification and handling Viewfinder -16 To use as a hand strap One-touch free-style grip beltTo restore the strap to the grip belt Using the LCD monitorAdjust the belt length and the pad position To use as a grip beltPower supply Using the viewfinder≥Hold the battery with your hand so it does not fall Removing the batterySupplied Min Battery Charging time and recordable timeInserting/removing a card Card access lamp Using the lens coverTurning the Camcorder on SD Memory CardHow to use the joystick Selecting a modeBasic joystick operations Joystick and screen displaySet Language English Switching the languageCard recording mode AUTO/MANUAL/FOCUS switch is set to Auto About the menu setting Using the menu screenOperating with remote control To exit the menu screenAdjusting LCD monitor/viewfinder Setting date and timeRemote control Using the remote controlSet Setup LCD AI Dynamic or Normal Changing the picture quality on LCD monitorRemote control usable range Install a button-type batterySelecting the remote control mode Concerning the button-type batteryAbout the clip on the backside Magic Wire Remote Control with Narration MicSwitching the microphone Recording mode About auto modeCheck before recording Basic Camcorder holdingPower Save On-screen display in the tape recording modeOFF When 5 minutes passes without Recording on a tapeBlank search function Check the recordingRecording still pictures onto a card Photoshot Stopping a blank search midway ThroughConcerning the focusing area On-screen display in the card recording modeProgressive Photoshot Select the size of still pictures to be Recorded on a cardRecording yourself Zoom in/out functionDigital zoom function To use the zoom microphone functionQuick start To cancel the quick start when Power is OFFBacklight compensation function To return to normal recordingTele-macro function Soft skin modeMagicPix functions To cancel the wind noise reduction Function To cancel fadingFade in/fade out function Wind noise reduction functionWhen the flash is not used Using the built-in flashUsing the flash VW-FLH3 optional Red eye reduction functionTo stop the timer midway through Self-timer recordingTo cancel the Wide/Cinema function Recording images for wide-screen TVs≥Set to Tape Recording Mode Set Advance EIS on To cancel the image stabilizer functionImage stabilizer function RapidFire Consecutive PhotoshotTo cancel the scene mode function Recording in various situations Scene modeRecording in natural colors White balance To restore to automatic adjustment Manual focus adjustmentManual shutter speed/aperture adjustment 60-1/8000 seconds Tape Recording Mode Manual iris/gain adjustmentShutter speed range Iris/gain value rangeSettings on the audio To adjust volumePlaying back tape Slow-motion playback/ frame-by-frame playbackVariable-speed search function Press the 1 button on the remote controlTo return to normal playback Frame-by-frame playbackPlayback on TV Press the OSD button on the remote controlPlaying back card To display the on-screen information On the TVTo display multiple playback files Deleting files recorded on a cardAbout the compatibility of still pictures To delete all filesProtecting files on a card Writing the printing data on a card Dpof settingFormatting a card Recording from a tape onto a card Edit modeCopying onto a DVD recorder or a VCR Dubbing ≥The image and sound are reproducedTo cancel the standby for recording Using the DV cable for Recording Digital DubbingAudio dubbing ≥Set to Tape Playback ModeBefore recording with audio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Using USB Driver Using the Camcorder with a PCSoftware Installation Installing the USB DriverUsing as a Web camera Connecting Computer CamcorderUsing Built-in SD Drive Set the Camcorder to PC ModeInstalling Video Stream Driver ≥Windows Messenger is activated Setting up Windows Messenger≥Click Start Programs Windows Messenger or MSN Messenger Setting up MSN Messenger Using MotionDV StudioClick Sign Type in your Sign-in name and password SoundClick Finish Click the MotionDV Studio Click NextInstructions If a description other than Microsoft is displayed Click Update DriverTo start MotionDV Studio Double click To disconnect USB cable safelyStart MotionDV Studio 5.3E LE ≥When Mode Dial is turned to change modes If you no longer need software or driver UninstallSelect Start Settings UninstallAbout the compatibility of the card Files About the SD Memory CardSD Memory Card Files recorded on a SD Memory CardTape Recording Menu Menu listTape Playback Menu LanguageCard Recording Menu Setup Display -63-REMOTEPicture Playback Menu Basic DATE/TIME -63-PROTECTMenus related to playback Menus related to taking picturesInitial SET Demo ModeOther menus Basic indications IndicationsRecording indications Playback indicationsTextual indications Confirmatory indicationsVideo heads are dirty You are attempting to erase protected filesThere is no ink. Check the connected printer There is no paper. Check the connected printerFunctions cannot be used simultaneously Functions Conditions which disableBefore requesting repair Problems and solutions Time code becomes inaccurate Original sound was erased when audio dubbing was performedRemaining tape time indication disappears Or time cord indication is not shownUsing MotionDV Studio 5.3E LE for DV Push the Reset Switch is displayedCard Recorded pictures are not clear Photoshot playback images do not look NormalAbout dirty heads About condensationAbout the Camcorder About the batteryAbout the card About the AC adaptorAbout the cassette Folder structure of the card Explanation of termsLCD monitor/Viewfinder Periodical check-upsAuto focus White balanceImage sensor SpecificationsPicture Accessory# Description Camcorder Accessory SystemVisa Camcorder Accessory Order Form For USA CustomersRequest for Service Notice USA Only Request for Service NoticePanasonic/Quasar Video Products Limited Warranty For USA CustomersAccessory Purchases Customer Services DirectoryCentralized Factory Servicenter Npcparts@us.panasonic.comAmbler Drive, Mississauga, Ontario L4W 2T3 Warranty For Canadian CustomersCamcorder Product One 1 year, parts and labour Riverside Way Th St. N. E Ambler DrNumerics IndexSpanish Quick Use Guide Guía española para el uso rápido Grabación de imágenes fijas en una Tarjeta Photoshot Grabación en una cintaReproducción de la cinta Reproducción de tarjetaPanasonic Puerto Rico, Inc

PV-GS150 specifications

The Panasonic PV-GS150 is a camcorder that emerged as a popular model in the early 2000s, showcasing advanced features tailored for both amateur and semi-professional videographers. This compact, lightweight camcorder is designed with versatility and user-friendliness in mind, making it an ideal choice for capturing cherished memories or producing creative video projects.

One of the standout features of the PV-GS150 is its 3CCD image sensor system. Unlike traditional single-sensor designs, the 3CCD technology uses three separate sensors to capture red, green, and blue colors independently. This results in vibrant, accurate color reproduction and enhanced image quality, especially in challenging lighting conditions. The camcorder supports a maximum resolution of 690,000 pixels, allowing users to record in various formats including 16:9 widescreen for cinematic-style videos.

The PV-GS150 is equipped with a Leica Dicomar lens that boasts a 10x optical zoom. This lens not only provides sharp and clear images but also has effective manual focus capabilities, allowing creators to achieve professional-looking shots. Additionally, the 700x digital zoom feature enables users to capture distant subjects without sacrificing image clarity.

Another notable characteristic of this camcorder is its digital image stabilization technology, which helps reduce the effects of camera shake. This feature is particularly beneficial when recording while in motion, resulting in smoother footage that enhances the overall viewing experience. The integration of advanced autofocus technology ensures that subjects are kept in focus, even as they move within the frame.

The Panasonic PV-GS150 also includes a 2.5-inch LCD flip-out screen, providing users with a vibrant display for framing shots and reviewing footage. The camcorder is compatible with various digital video recording formats, including MiniDV tapes, which are known for their reliability and quality. Moreover, it features an audio input for an external microphone, broadening the possibilities for capturing high-quality sound.

In terms of connectivity, the PV-GS150 offers USB output and FireWire (IEEE 1394) ports, facilitating easy transfer of video files to computers for editing and sharing. With its blend of user-friendly features, advanced imaging technologies, and portability, the Panasonic PV-GS150 remains a noteworthy option for those looking to venture into the world of video recording. Whether for family gatherings, travel documentation, or creative projects, this camcorder delivers impressive performance and reliability, making it a lasting favorite among users.