Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit.
≥The battery will not be charged if the unit is turned on.
≥It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 oF and 86 oF). (The battery temperature should also be the same.)
1 | Connect the AC cable to the AC | |
| adaptor, then the AC outlet. | |
2 | ||
Connect the AC adaptor to the DC |
input terminal.
≥ The status indicator will flash red at an
interval of 2 seconds (approximately
1 second on, 1 second off), indicating that charging has begun.
It will turn off when the charging is completed.
| ∫ Connecting to the AC outlet |
| It is possible to use this unit with power |
supplied from the AC outlet by turning on the | |
| unit with the AC adaptor connected. |
| When recording for a long time, keep the AC |
| adaptor connected and use it together with the |
| battery. |
ADC input terminal
∫To charge by connecting to other device
It is possible to charge by connecting to other device with the USB cable (supplied).
≥Do not use any other AC adaptors except the supplied one.
≥We recommend using Panasonic batteries. (l 10, 29)
≥If you use other batteries, we cannot guarantee the quality of this product.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.
12
VQT4Q73