Panasonic HDC-SD1 About motion picture Compatibility, Skip playback to the start of a scene

Playback

ªAbout motion picture

compatibility

≥This unit is based on the AVCHD format. ≥The video signal that can be played back on

this unit is 1440k1080/50i.

≥This unit may degrade or not playback motion pictures recorded or created on other products, and other products may degrade or not playback motion pictures recorded on this unit, even if the products support the AVCHD.

≥No sound will be heard except during normal playback.

≥If pause play is continued for 5 minutes, the

screen returns to the thumbnails.

≥When the amount of time recorded on the scene is short, playback may not be possible.

≥Scenes which cannot be displayed as thumbnails (the thumbnails are displayed as ) cannot be played back. An error message appears and the screen shows the thumbnails.

≥The power will not turn off even if the LCD monitor is closed.

≥The date/time displayed may be different from the recording date/time and it may take time to display the thumbnail display when playing back motion pictures not recorded on this unit.

≥The remaining time for playback indication will be reset to “0h00m00s” each scene.

Skip playback (to the start of a scene)

(Operation is possible with the remote control only.)

Press the : or 9 button on the remote control during playback.

SEARCH PLAY SEARCH

STILL ADV PAUSE STILL ADV

SKIP STOP SKIP

Slow-motion playback

1Move the cursor button up during playback to pause the playback.

2Move and hold the cursor button right. (Slow-motion pictures will be played back in reverse when you move and hold the cursor button left.)

≥Normal playback is restored when you move the cursor button up.

≥When slow-motion pictures are played back in reverse, they will be shown continuously at intervals of 0.5 seconds.

ªOperating with the remote

control

Press the E or D button.

SEARCH PLAY SEARCH

STILL ADV PAUSE STILL ADV

SKIP STOP SKIP

64

VQT1A34