Sanyo C2472, C1872, CL2472, CL1872 Remote Control Unit Installation Position, Mounting on a Wall

Models: CL1872 CL2472 C1872 C2472

1 88
Download 88 pages 39.38 Kb
Page 40
Image 40
7-3. Remote Control Unit Installation Position

7-3. Remote Control Unit Installation Position

The remote control unit can be operated from either a non-fixed position or a wall-mounted position.

To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places:

In direct sunlight

Behind a curtain or other place where it is covered

More than 26' (8 m) away from the air conditioner

In the path of the air conditioner’s airstream

Where it may become extremely hot or cold

Where it may be subject to electrical or magnetic interference

Where there is an obstacle between the remote control unit and the air conditioner (since a check signal is sent from the remote control unit every 5 minutes)

7-3-1. Mounting on a Wall

Before mounting the remote control unit, press the ON/OFF operation button at the mounting location to make sure that the air conditioner operates from that location. The indoor unit should make a beeping sound to indicate that it has received the signal.

Remote control unit mount

 

Mounting screws

Press

 

5/32 5/8"(4 16mm)

 

(included)

 

 

Set in

 

place

Rear side

Hole

To prevent loss of the remote control unit, you can connect the remote control unit to the mount by passing a string through the remote control unit and attachment hole.

To take out the remote control unit, pull it forward.

Fig. 7

40

Page 40
Image 40
Sanyo C2472, C1872, CL2472, CL1872 service manual Remote Control Unit Installation Position, Mounting on a Wall