Sanyo C1872, C2472, CL2472, CL1872 Care and Cleaning continued, Anti-MoldFilter, Anti-moldfilter

Anti-Mold Filter

How to remove the anti-mold filter

Care and Cleaning (continued)

The anti-mold filter behind the air intake grille should be checked and cleaned at least once every two weeks.

1. Grasp both ends of the air	Air intake grille
intake grille, and remove it by
opening towards the front and
pulling towards you.

2.Remove the anti-mold filter

attached to the rear of the air	Anti-mold filter
intake grille.

Cleaning

Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it.

How to replace the anti-mold filter

1.With the FRONT mark of the anti-mold filter at the front, align the two indentions near the mark with the hooks at the rear of the air intake grille, and then mount the anti-mold filter.

2.Allow the edge of the air intake grille to slide into the top of the indoor unit, and then insert it all the way inside.

3.To attach the air intake grille to the indoor unit, press its bottom right and left corners as well as its bottom center into place.

Anti-mold filter

FRONT mark

Hook

Groove

Pin

Air intake grille

Air intake grille

NOTE

Attach so that the round pins at the top right and left corners of the air intake grille are inserted into the grooves at the top right and left of the indoor unit.

22 OI-800-22-EG