Kenwood KDC-4060RA, KDC-4060RG instruction manual Removing the hard rubber frame, Removing the Unit

Page 25

■Removing the hard rubber frame

1Engage the catch pins on the removal tool and remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

Lock Catch

Accessory2

Removal tool

2When the lower level is removed, remove the upper two locations.

NOTE

The frame can be removed from the top side in the same manner.

■Removing the Unit

1Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.

2Remove the Hex-head screw with integral washer (M4⋅8) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as shown.

Accessory3

Catch facing up

4Lower the removal tool toward the bottom, and pull

out the unit halfway whilst pressing towards the inside.

2CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being

careful not to drop it.

— 25 —

Image 25

Contents KDC-4060RG KDC-4060RA Contents 2WARNING 2CAUTION Safety precautionsMarking of products using lasers Except for some areas Cleaning the CD SlotCleaning the Unit Cleaning the Faceplate TerminalsHandling Compact discs Buttons and Display Tuner featuresBasic operations CD player features RDS featuresOther features Volume PowerBasic operations See AttenuatorEnding the menu mode Press the Menu button Changing setting for currently displayed functionMenu System Selecting function to setSelecting Tuning Mode Tuner features SeeTuning Local Seek FunctionRecalling a Preset Station Station Preset MemoryCancelling Auto Memory Entry During Its Operation Monaural ReceptionAlarm RDS features SeeRDS Radio Data System EON Enhanced Other NetworkRestricting RDS Region Region Restrict Function Switching to a Different Traffic Information StationTraffic Information Function Turning Region Restrict Function On/OffAuto TP Seek Function Presetting Volume for Traffic Information/NewsTurning Auto TP Seek Function On/Off Turning News Bulletin Function On/Off News Bulletin Function With PTY News Timeout SettingProgramme Type PTY Function Switching Display for CDs CD player features SeePlaying CDs Track SearchTrack Scan Function Track Repeat FunctionRandom Play Function Audio Control Setting Other features SeeAdjusting Time Clock DisplayTurning Disabled System Indicator On/Off DSI Disabled System IndicatorTheft Deterrent Faceplate Removing FaceplateInstallation Procedure AccessoriesConnector Function Guide Connecting Cables to TerminalsUnit Vehicle Ignition cable Red InstallationRemoving the Unit Removing the hard rubber frameProblem Possible Cause Solution Troubleshooting GuideLW tuner section MW tuner sectionCD player section Audio section