Panasonic AK-HC910P manual Side Panel, Breaker Breaker, Zoom/Focus Connector ZOOM/FOCUS

Major Operating Controls and Their Functions

6Camera mounting hole (1/4-20UNC)

7Camera mounting hole (3/8-16UNC)

The screw holes can be used to secure the camera for installing it on camera housing, and when using a pan/tilt head or a tripod.

_ Side Panel

BREAKER	8
ZOOM/￿

FOCUS

9

1

SDI OUT :

2

;

1/ F

8Breaker [BREAKER]

If the breaker is operated due to over-current or the like, check the cause and eliminate the trouble, then press the breaker button.

9Zoom/Focus Connector [ZOOM/FOCUS]

Used to connect the zoom/focus control cables of lens.

			Pin No.	Signal	Pin No.	Signal
9	1		1	Focus control selection	7	COM
8	10	2	2	Zoom control selection	8	Focus control
7 12	11	3	3	GND	9	Zoom control
6	5	4	4	Forcible iris closing	10	Iris control selection
			5	Iris control	11	COM +Voltage
			6	+Voltage	12	COM –Voltage

: SDI Output Connectors [SDI OUT 1, 2] SDI signal output is given by two lines.

;Interface Connector [I/F]

		Pin No.	Signal	Pin No.	Signal
	15	1	Y signal output	8	Y signal GND
7		2	Pb signal output	9	Pb signal GND
	14
6	13	3	Pr signal output	10	Pr signal GND
5
	12	4	Sync signal input	11	Sync signal GND
4
3	11	5	DC 12V	12	DC GND
	10
2		6	Frame GND	13	TXD (C)
	9
1	8	7	TXD (H)	14	RXD (H)
				15	RXD (C)

TXD: Data from Camera to remote controller

RXD: Data from remote controller to camera

7