![](/images/new-backgrounds/1141021/14102145x1.webp)
Setting of Menu Items
!Maintenance menu
°° | R/B GAIN | |
°° | ||
| :+000 | |
| R GAIN | |
| B GAIN | :+000 |
°°DTL°° |
|
| |
:ON | |
DTL | |
TOTAL DTL LVL | :+00 |
H DTL LVL | :11 |
CRISP | :02 |
LVL DEPENDENT | :2 |
PEEK FREQUENCY | :10 |
KNEE APERTURE | :ON |
KNEE APA.LVL | :10 |
SLIM DTL | :OFF |
DTL(+) | :+00 |
:+00 | |
DTL CLIP | :0 |
DTL SOURCE | :(B+G)/2 |
|
|
4 Gain adjustment menu
The gain of R, B GAIN is adjusted. The difference from the state of being
•The numeral value displayed after normal ending of AWB is “0” for both of R, B.
5 Detail adjustment menu
DTL: Setting of valid/invalid of detail function.
TOTAL DTL LVL: Horizontal and vertical detail level adjustment.
H DTL LVL: Horizontal DTL component is adjusted independently of DTL adjusted by TOTAL DTL.
CRISP: It functions to eliminate slight detail component and to reduce the noise level.
LVL DEPENDENT: It suppresses the detail of low brightness level. The brightness level to be suppressed is adjusted here.
PEAK FREQUENCY: It lifts up the detail component, and selects the central frequency.
KNEE APERTURE: It functions to emphasizes the detail component of the portion with knee applied.
KNEE APA.LVL: It sets the degree of knee aperture.
SLIM DTL: It validates the function of slimming the portion where the detail is thick and emphasized.
23