(7)Trigger
(a)Set up by Administrator
(1)Go to “Trigger” in “Admin” menu by Control Panel.
(2)Select “Action” which you need when detecting the trigger signal (Trigger 1 to 8).
Trigger On or Off setting 
Select “Action” from the followings for the detection of trigger signals
“REC”
“STOP”
“AUTOZOOM”
“CAM1”
“CAM2”
“CAM1REC”
“CAM2REC”
“CAM1LED”: Change ON/OFF of REC lamp on the Front Camera
“NONE”: No operation
Select the Detection from the followings and choice of detection depends on “Action”:
1.In “REC”, “CAM1REC”, “CAM2REC” at Action,
Select the detection from “H”, “Level H”, “L”, “Level L”, “B”.
2.In “CAM1”, “CAM2”, “CAM1LED”, “AUTOZOOM”, “STOP” Select the detection from “H”, “L”, “B”.
3.In “None”, select the detection from “H”, “L”,
“SPEED” (Trigger 8 only)
Assign the characters to be used in the OSD display. *When SPEED is selected at the trigger, “Printable” becomes