Panasonic AGCK10P manual REC/Play Set up by Administrator

(3) REC/Play Set up by Administrator

[Admin] Page 1/2

From Control Panel Top Menu --”Setup info”—”Admin”

Power off time setting after shutting down the ignition

Initial camera setting, camera 1 or 2

Initial Audio 2 setting, INCAR or 2nd WMIC or LINK CAM

Start recording when VPU is turned on

Setting: Off Fixed

1 fps (frame per sec) recording

Recording mode: F-2Mbps (720x480, 30fps)

F-1Mbps (720x480, 10fps), Q-1Mbps (320x240, 30fps)

Q-512kbps (320x240, 30fps)

Recording will continue up to 1,2,5,10,15,20,30, 60, 90, or Continue even if pressing STOP button

Set Pre Rec and Post Rec Time (0 to 90 seconds)

Set rule of file name, world time (WT) or local time (LT)

Select On Screen Display, “Simple”, “Details”, “Last” or “Off”

Enable or disable output of recording status as GPIO9 Enable or disable output of recording Error status as GPIO9

Select the initial audio output upon power on. (Off, 1, 2, Both, Last)

Select “Single” (normal playback, one file at a time) or “Relay” (multiple files playback)

Playback jumps to the trigger or bookmark position, whichever found earlier

Move to the beginning of a file during playback