
#E_AppendixE Page 14 Wednesday, September 2, 1998 10:05 AM
Using the Setup Menus
Using the Setup Menus
Using the control panel buttons in setup mode
With the LED type control panel, setup functions, items, and options to be selected are printed on paper. To specify or execute a selection, position the yellow arrow on the print head at the selection using the ONLINE, FONT, MENU, and LOCK buttons.
With the LCD type control panel, setup functions, items, and options are displayed on a
The organization of setup functions, items, and options is the same for both types of control panels. Abbreviated names of functions, items, and options printed or displayed are also the same. See Chapter 8 for information on items that are the same.
This section describes the basic operations used in setup mode. It also describes some typical operations in detail. However, this section does not describe all setup mode operations because the LCD screen messages are
Selecting options
The MENU1, MENU2, HARDWRE, ADJUST, CONFIG, and
Relationship of the three screen sections and the F1, F2, F3 buttons
As described in “Setup Mode Reference” on page
User’s Manual |