Fujitsu DL6400 manual Exit from Setup

#E_AppendixE Page 19 Wednesday, September 2, 1998 10:05 AM

Using the Setup Menus

Using the EXIT FROM SETUP function or the ONLINE or NEXT

DISPLAY button

When you use the EXIT FROM SETUP function or press the ONLINE or NEXT DISPLY button, the printer prompts you to permanently or temporarily save changed options. Use these methods when you want to place the printer offline after saving. Follow these steps:

Func. ↓	Item ↓	Option ↓
XXXXX	XXXXX	XXXXX
Func. ↓	Item ↓	Option ↓
EXIT FROM SETUP		GO
EXIT: Use temporarily?
USE	SAVE	Not-exit

NOTE: Values are lost if power is turned off.

NOTE: Values have been

permanently saved.

Enter	<Menu>	<Lock>
setup	MENU1	OFF

1.Be sure the printer is in setup mode with the menu shown at the left displayed.

2.Press F1 until EXIT FROM SETUP appears un- der Func. Then press F3 to execute the EXIT FROM SETUP function. Alternatively, press ONLINE or NEXT DISPLAY.

The prompt message shown at the right appears.

3.• To use the changed options temporarily press F1. The save execution message shown at the right briefly appears.

The changed options are now temporarily saved.

•To use the changed options permanently press F2. The save execution message shown at the right briefly appears.

The changed options are now permanently saved.

4.The original basic menu reappears, and you can place the printer online.

USING THE

LCD/LED TYPE

CONTROL PANEL

User’s Manual E-19