Fujitsu DL6400 manual Messages, Stop, USE Save, Exit

#E_AppendixE Page 23 Wednesday, September 2, 1998 10:05 AM

Messages

Messages	Status messages
	Table E-2 lists messages the printer displays during normal operation.
	The messages are listed alphabetically.
	Table E–2 Printer status messages
	Message		Meaning
	Data will be lost. OK?		Data remains in the print buffer. If
	No	Yes	you do not need the data, select Yes
			(press F3).
	DEMO pattern printing		The printer is printing or ready to
	STOP	GO	print a demonstration pattern page.
			Press F2 to pause printing. Press F3
			to start or restart printing.
	ERROR! Use this button to		You have used the ↓↑ button
	invert arrows on LCD.		incorrectly. Use ↓↑ to reverse the
			direction of the arrows shown in the
			display. You cannot use this button
			to change the direction of the
			NEXT DISPLAY button.
	EXIT: Use temporarily?		The SAVE or EXIT function was
	USE SAVE	Not-exit	selected in setup mode. Press F1 to
			use the changed options
			temporarily (until the power is
			turned off). Press F2 to use the
			changed options permanently. Press
			F3 to return to the initial setup
			menu.
	Factory values are set!		The LOAD DEFAULTS function
			was selected in setup mode, and the
			printer's factory default settings
			have been reset in MENU1 and
			MENU2.
	HEX dump mode		The printer is in setup mode and is
	EXIT		printing in hexadecimal format.
			Press F1 to exit.

USING THE

LCD/LED TYPE

CONTROL PANEL

User’s Manual E-23