Fujitsu DL6400 manual Area Size in mm Remarks

DL6400/6600 Book Page 7 Friday, July 31, 1998 11:42 AM

Continuous Forms

6.Print area

The figure below shows the print area on continuous forms.

A			Area	Size in mm	Remarks
		F		(in)
			A	4.2 (0.17)	Characters printed in this
					area may not be neat. A line
					spacing of 4.2 mm (1/6 in) or
					more prevents characters on
					adjacent lines from
	Print area				overlapping.
		Perforations	B	5.08 to 30	Depending on the paper
		(fold)		(0.2 to 1.18)	width, this size varies as
					follows:
		F			101.6 to 119.4 mm (4 to 4.7
A					in) wide: 5.08 to 9 mm (0.2
					to 0.35 in)
A					388.6 to 419 mm (15.3 to
		F			16.5 in) wide: 15 to 30 mm
					(0.6 to 1.18 in)
			C	5.08 (0.2)	This size varies with the
	Print area			or more	paper width and number of
					print columns, but must be at
					least 5.08 mm (1/5 inch).
			D	152 (6.0)	This area feeds off the
D					tractors and prevents reverse
					line feed.
		E	E	Appropriately	This value indicates the
G				29 (1.1)	paper-end detection point.
B	101.6 to 419 mm	C	F	3.5 (0.14)	Do not move the printing
	(4 to 16.5 in)				unit horizontally in this area
					as paper may be smeared by
					the ink ribbon or the printing
					unit may be caught at bulges.
			G	4.2 (0.17)

PAPER SPECIFICATIONS

User’s Manual 7-7