DL6400/6600 Book Page 7 Friday, July 31, 1998 11:42 AM
Using Setup Mode
4.Select the current emulation.
To leave the emulation unchanged, press FONT to select the current emulation and print <FONT> and its options.
5.Change the font to Prestige Elite 12.
Press LOCK once to position the yellow arrow on the print head beneath PRSTG12. Press FONT to select PRSTG12 and print <QUALITY> and its options.
6.Select the current print quality.
To leave print quality unchanged, press FONT to select the current print quality and print <PITCH>.
7.Change spacing to 12 cpi and exit MENU2.
Press LOCK once to position the yellow arrow beneath 12 CPI. To leave MENU1 unchanged, press ONLINE to select 12 CPI and exit MENU2. The <<FUNCTION>> menu is then reprinted.
8.Exit setup mode, saving the new font and spacing.
The cursor is beneath SAVE&END, so press FONT or MENU to select SAVE&END. The printer save Prestige Elite 12 and 12 cpi as the new default settings in MENU2. It then exits setup mode and goes back online. These settings remain in effect until changed.
Important:
1.Load continuous forms before entering setup mode. LF/FF and LOAD cannot be used to feed or load paper in setup mode.
2.When setup mode is entered, short help menus are printed at the top of the page. Help menus are also printed when
3.Functions and options can be printed only one at a time. To move forward (print the next function) in the item list, press FONT. To move backward (print the previous function), press MENU.
4.While in the <<FUNCTION>> menu or selecting a function that contains items and selectable options, press ONLINE to reprint the <<FUNCTION>> menu.
SETUP MODE
User’s Manual |
