Fujitsu DL6400 manual Horizontal tab execution, Esc O

DL6400/6600 Book Page 6 Friday, July 31, 1998 11:42 AM

Fujitsu DPL24C PLUS

	Table B–1 Printer commands in the DPL24C PLUS command set (Continued)
Function		Command
Tabulation		HT
Horizontal tab execution
Set horizontal tabs		ESC D (n1) ... (nk) NUL
n1 to nk are ASCII values of print columns
(at current character width) where tabs are to be set.
(1 ≤ n ≤ 255) (1 ≤ k ≤ 255)
Move to print column n (1 ≤ n ≤ 255)		ESC HT (n)
Move dot column n/360 inch (n = n1 + n2 ⋅ 256)		ESC $ (n1) (n2)
The value below is for 136-column printers.
(0 ≤ n1	255) (0 ≤ n2 ≤ 19)
(0 ≤ n2	⋅ 256 + n1 ≤ 4895)	ESC e R (s)
Horizontal relative move by n/360 inch
(–999 ≤ n1 n2 n3 ≤ +999)		(n1) (n2) (n3)
n1, n2, and n3 are the hundreds, tens, and ones digits of the
distance. s is a plus or minus (+ or –) sign.		VT
Vertical tab execution
Set vertical tabs		ESC B (n1) ... (nk) NUL
n1 to nk ASCII are values of lines (at current line spacing)
where tabs are to be set.
(1 ≤ n ≤ 255) (1 ≤ k ≤ 64)
Move to line n (1 ≤ n ≤ 255)		ESC VT (n)
Page Formatting
Set right margin (0 ≤ n ≤ 255)		ESC Q (n)
Set left margin (0 ≤ n ≤ 255)		ESC l (n)
Set perforation skip by n lines		ESC N (n)
(1 ≤ n ≤ 127)
Perforation skip off		ESC O
Set page length to n lines		ESC C (n) or
(1 ≤ n ≤ 127)		ESC e c (n) or
Set page length to n inches		ESC FF (n)
		ESC C NUL (n) or
(1 ≤ n ≤ 22)		ESC e c NUL (n) or
Set page length to n/360 inch (n = n1 ⋅ 256 + n2)		ESC FF NUL (n)
		ESC e f (n1) (n2)
(0 ≤ n1 n2 ≤ 255)
(1 ≤ n1	⋅ 256 + n2 ≤ 7920)

B-6 User’s Manual