Fujitsu DL6400 manual Changing MENU1 MENU2 Options

DL6400/6600 Book Page 11 Friday, July 31, 1998 11:42 AM

Changing MENU1 and MENU2 Options

Table 8–2 Required options (Continued)

Function	Item	Options
HARD-	FORMAT	For a serial interface model, serial
WRE	BAUD-RT	interface options selected for the
	PROTOCL	printer must match those of the
	DSR	software or operating system.
	DUPLEX	Otherwise, the printer will not print or
		will print incorrectly.
		See “Changing Hardware Options” on
		page 8-24.
ADJUST	None	If your software does not specify the
		top margin of the page, use the
		printer's default top-of-form setting:
		25.4 mm (1 in) from the top of the
		paper. If the software does specify the
		top margin, change the default setting
		to 4.2 mm (1/6 in).
		See “Changing Print Adjustment
		Options” on page 8-28.

SETUP MODE

Changing

MENU1 and

MENU2 Options

MENU1 and MENU2 set print options for MENU1 and MENU2 on the control panel. In normal (nonsetup) mode, these menus are easily switched.

Table 8-3 lists MENU1 and MENU2 items and options in the order they are printed. For some emulations, some items are not defined and some options differ.

MENU1 is active when the printer is first turned on.

The printer emulation must match that of the software. Otherwise, the printer will not work correctly. If you regularly use two different emulations, assign the most frequently used to MENU1 and the other to MENU2. All settings available for MENU1 and MENU2 are optional. Some items and options differ with the emulation.

To determine which features specific software supports, refer to the software documentation.

User’s Manual 8-11