Fujitsu DL6400 Word-Lg, Bit, Buffer, 2KBYTE2, 8KBYTE, 24KBYTE, 32KBYTE, 96KBYTE, 128KBYT, Intrfce

DL6400/6600 Book Page 25 Friday, July 31, 1998 11:42 AM

			Changing Hardware Options
	Table 8–4 HARDWRE options (Continued)
HARDWRE item	Options	Description
<WORD-LG>		To determine the required word length, refer to processor
		documentation. Select 8-BIT when printing bit-image
		graphics.
	8 BIT	8-bit word length. Used by most processors
	7 BIT	7-bit word length (MSB = 0).
<BUFFER>		Print buffer	Download buffer
	NONE	0 bytes	28K bytes
	256BYTE2	56 bytes	127.75K bytes
	2KBYTE2	2K bytes	126K bytes
	8KBYTE	8K bytes	120K bytes
	24KBYTE	24K bytes	104K bytes
	32KBYTE	32K bytes	96K bytes
	96KBYTE	96K bytes	32K bytes
	128KBYT	128K bytes	0K bytes
		Note:
		With 128KB selected, the printer cannot accept any
		downloaded font data.
<INTRFCE>		Selects the type of the interface to the computer.
	PARALEL	Centronics parallel interface
	SERIAL	RS-232C serial interface
	AUTO-2S	Auto interface selection mode
	AUTO-4S	Both interfaces are ready for communication.
	AUTO-6S	Specify the timing regarding the selected interface as
	AUTO-10S	being inactive.
	AUTO-15S
	AUTO-20S

Serial interface items: The <FORMAT> to <DUPLEX> items are printed only when you select the RS-232C option for the <INTRFCE> item. Be sure that options selected on the printer match the operating system or software. Refer to related documentation.

SETUP MODE

User’s Manual 8-25