Fujitsu manual DL6400/6600 Book Page 31 Friday, July 31, 1998 1142 AM

DL6400/6600 Book Page 31 Friday, July 31, 1998 11:42 AM

Changing Print Adjustment Options

2.Select ADJUST.

Repeatedly press LOCK to position the yellow arrow on the print head beneath ADJUST. Press FONT or MENU to select ADJUST and print the <CNT-ORG> options.

<CNT-ORG>	1/6IN	2/6IN	3/6IN	4/6IN	5/6IN	6/6IN 7/6IN	8/6IN	9/6IN
	10/6IN	11/6IN	....

3.Select an option from 1/6 IN to 66/6 IN.

Press LOCK to move the yellow arrow on the print head to the appropriate option. Press FONT to select the option. The <CNTFINE> item is then printed. If the top-of-form must be fine- adjusted, do so now. Otherwise, go to step 4.

4.Exit ADJUST.

Press ONLINE to exit ADJUST and reprint the <<FUNCTION>> menu.

5.Exit setup mode, saving the top-of-form setting.

Make sure that the yellow arrow is positioned beneath SAVE&END. Then press FONT or MENU.

6.Check the top-of-form setting.

Load paper and print a sample page using software to check adjustment. If necessary, reenter setup mode and fine-adjust the top-of-form by changing the <CNTFINE> option.

SETUP MODE

User’s Manual 8-31