Fujitsu DL6400 manual Leave an interval of 8 mm 0.3 in or greater

DL6400/6600 Book Page 16 Friday, July 31, 1998 11:42 AM

Precautions

b.When consecutively printing lines that satisfy the specification in (a), leave an interval of 8 mm (0.3 in) or greater between lines.

Leave an interval of 8 mm (0.3 in) or greater.

Important:

If the line thickness is 0.5 mm (0.02 in) or less, the interval can be 4 mm (0.16 in) or more.

c.When printing near a paper edge, leave a margin of 8 mm (0.3 in) or greater.

Top or bottom end of paper

Leave a margin of 8 mm (0.3 in)

or greater.

Important:

If the line thickness is 0.5 mm (0.02 in) or less, the interval can be 4 mm (0.16 in) or more.

d.When printing vertical lines in the shaded area in Figure 7-##, make lines 0.5 mm (0.02 in) thick or less and do not print more than one line.

Before printing characters in the shaded area in Figure 7-14, use a sample to check that the characters can be printed.

7-16 User’s Manual