Fujitsu DL6400 manual Changing Configuration Options, Tearoff Manual, Auto, Tearpos Visible, Always

DL6400/6600 Book Page 32 Friday, July 31, 1998 11:42 AM

Changing Configuration Options

Changing

Configuration

Options

CONFIG defines primary printer conditions for the following:

•Tearing off continuous forms

•Autoloading single sheets

•Directly decoding certain commands

Table 8-6 lists CONFIG items and options in the order they are printed. The procedure for changing the printer configuration options follows Table 8-6.

Table 8–6 CONFIG options

CONFIG item	Options	Description
<TEAROFF>	MANUAL	Specifies automatic or manual tearoff feed.
		Automatic tearoff feed is valid for continuous forms only.
		Tearoff feed can also be performed using the TEAR OFF
		button.
	AUTO	Automatic tearoff feed is invalid, and tearoff feed must be
		performed using the TEAR OFF button.
<TEARPOS>	VISIBLE	Specifies the tearoff position.
		Select this option when the software positions forms at the
		next top-of-form after printing the last data. The printer
		performs tearoff feed without adding a form feed when
		data transfer ends.
	ALWAYS	Select this option when the software stops after printing
		the last data. The printer performs tearoff feed after adding
		a forms feed when data transfer ends.
		Note:
		For both settings, tearoff positioning fails if the page length
		setting does not match the actual perforation spacing.

The <TEAR-EN> item is printed when AUTO is specified for the <TEAROFF> item.

8-32 User’s Manual